Ec Declaration Of Conformity - Makita BHR261 Betriebsanleitung

If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• SDS-Plus Carbide-tipped bits
• Bull point
• Cold chisel
• Scaling chisel
• Grooving chisel
• Drill chuck assembly
• Drill chuck S13
• Chuck adapter
• Chuck key S13
• Bit grease
• Side grip
• Depth gauge
• Blow-out bulb
• Dust cup
• Dust extractor attachment
• Safety goggles
• Plastic carrying case
• Keyless drill chuck
• Various type of Makita genuine batteries and chargers
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
Work mode: Work mode: Drilling into metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
Work mode: chiseling function
Vibration emission (a
Uncertainty (K): 1.5 m/s
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
Work mode: hammer drilling into concrete, 16 mm
diameter and 100 mm depth
Vibration emission (a
Uncertainty (K): 1.5 m/s
10
ENG102-1
): 91 dB (A)
pA
): 102 dB (A)
WA
ENG201-1
2
): 3.0 m/s
h,HD
2
ENG215-1
2
, ): 11.0 m/s
h CHeq
2
ENG217-1
2
): 13.5 m/s
h,HD
2
EC-DECLARATION OF CONFORMITY
Model; BHR261, BHR261T
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014 in accordance with Council
Directives, 2004/108/EC, 98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
CE 2008
Director
ENH102-8