Electrical Connections - Gewiss Chorus GW 10 705 Bedienungsanleitung

INSTALLATION INSTRUCTIONS
Important: The installation and electrical connecting of the devices and appliances must
be undertaken by qualified personnel and in accordance with standards and regulations in
force at the time. The manufacture declines to accept any responsibility concerning the use
of the products in accordance with particular environmental or installation regulations, as
this responsibility rests entirely with the installer.
Warning: Prior to installing the product, ensure the mains electrical supply is disconnected.
With the mains power supply disconnected:
Connect the power supply wires to terminals:
Connect the wires of the device to be controlled to terminals:
With strong inductive loads (pumps and solenoid valves) it is recommended that an RC
filter is connected in parallel to the load.
N L

Electrical connections

3 2
1
15
n° L (Line) and n° N (Neutral).
n° 1 = NA contact
n° 2 = common
n° 3 = NC contact
Cabling terminals
Power supply : L - Phase
N - Neutral
Output relay: 1 = NA contact
2 = common
3 = NC contact
E
N
G
L
I
S
H
E
N
G
L
I
S
H