CONNECTIONANDPREPARATION
Connectingthepowercord
Notes:
Check that the mains voltage on the type
7
plate (on the bottom of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
All the other devices/loudspeakers must be
7
connected before you connect the power
cord.
1Insert the power cord into the
on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
24
ENGLISH
Activating the battery in the re-
motecontrol
1
Changingtheremotecontrolbat-
tery
1
2
3
»AC ~
« socket
4
5
Pull off the film from the battery.
Undo the battery compartment screws
Pull out the battery compartment
Insert the battery (AAA 1.5V) making sure that
the positive terminal (+) is facing upwards.
Push in the battery compartment.
Tighten the battery compartment screws.
Notes:
Do not expose the batteries to extreme heat,
7
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
7
when you know that the hi-fi system will not
be used for a long period of time. The man-
ufacturer accepts no liability for damage
caused by leaking batteries.
Environmentalnote:
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
---------------------------------------