Pairing The Device And Remote Control - Yamaha CS-800 Kurzanleitung

Connections and setup

Pairing the device and remote control

In order to operate the device with the remote control, follow the procedure below to pair
them.
1.
Long-press the [FUNCTION] button (on the rear panel of the device) for at
least 2 seconds.
Device (rear panel)
The status indicator on the front panel of the device flashes in blue.
2.
Long-press the menu button on the remote control for at least 2 seconds.
Pairing is finished after the status indicator on the front panel of the device lights up in
blue for 3 seconds.
12
CS-800 Quick Guide