Klarstein HAVASIA UV 6 LUMINANCE Bedienungsanleitung Seite 39

Attaching the water drain
Insert the water drain hose into a water drain pipe with a minimum diameter of 4 cm or
leave it hanging in the drain. Make sure that the hose is not bent or curved.
Use the supplied hose clamp for fastening. To prevent backflow, the water drain pipe
(A) must not be higher than 75 cm and the drain hose (B) must not be immersed in water.
Note: Secure the drain hose firmly to the drain with the supplied hose clamp to
prevent it from moving and leaking waste water.
Collecting waste water
If your drain is more than 1 metre below the appliance, you cannot direct the water
directly into the drain. In this case, you must collect the waste water in an appropriate
collection container, which must be located lower than the water outlet.
Extension hose
If you need an extension hose, use a similar type and make sure it is not longer than 4
metres. Longer hoses can have a negative effect on the cleaning performance of the
dishwasher.
EN
39