KITE PRO Vision Bedienungsanleitung Seite 16

6 Storage
Before the Kite Pro is put away it should be completely dry. Store the Kite Pro in a clean
area. The storage temperature should be between +5 °C and +35 °C. The humidity content
must not exceed 80%. Do not store any dirty filters with the Kite Pro in the same area. The
shelf life for the filters is indicated on the filter itself.
7 Faults, troubleshooting and repair
Warning: In case of doubt concerning the proper functioning of the product, please
contact the supplier or Arbin Safety Products.
Problem
Kite Pro beeps every second
Kite Pro beeps every 30 seconds
Kite Pro does not produce any air
Kite Pro supplies insufficient air
Kite Pro runs on a very high speed
Charger LED does not light
Charger LED blinks all the time
Battery discharges too quickly
Reason
Filter clogged
Battery empty
Switch is turned off
Motor is defective
Electronic problems
Battery empty
Battery is almost empty
Filter is clogged
Speed sensor failure
Battery defective
Shortcut in electronics
Charger defective
Battery defective
16
Solution
Replace filter
Charge battery
Turn switch on
Return to dealer
Return to dealer
Charge battery
Charge battery
Replace filter
Return to dealer
Return to dealer
Remove from
socket
Use new charger
Return to dealer
wall