Optional Accessories - Makita VR001G Betriebsanleitung

CAUTION:
Be sure to attach the hooks of the
shoulder strap to the tool securely. If the hooks are
attached incompletely, they may come o and cause
injury.
CAUTION:
Be sure to use the shoulder strap
dedicated to this tool. U sing other shoulder strap
may cause an injury.
H ang the hooks of the shoulder strap o v er the hanging
holes on top of the tool.
Fig.22: 1. S houlder strap 2. H ook 3. H anging hole
OPERATION
CAUTION:
Put the shoulder strap on the
shoulder, and hold the tool firmly with both
hands.
NOTICE:
At the very beginning of operation, the
flexible shaft tends to vibrate at a higher ampli-
tude. The tool w ill restore the normal amplitude
after you squeeze and release the s w itch trigger a
fe w times repeatedly.
Make sure to thro w in and keep the v i b ration head
stand straight during operation. U se the tool w ithin the
e ective vibration ranges at equidistant intervals. The
e ective air bubble removal range is approximately ten
times the diameter of v i b ration head.
Fig.23
Fig.24
NOTICE:
Do not use the tool to move concrete
in the form w ork. The mortar will just move away
and the coarse aggregate w ill remain, causing
segregation.
Fig.25
Effective leveling and removal of air
bubbles
Remo v al of the air b u b b les is complete after y ou ha v e
worked the tool throughout each e ective range, the
concrete stops shrinking, and the mortar has risen
evenly to the surface, giving o a light appearance.
Gentl y remo v e the operating tool not to lea v e holes.
When using the tool on slope, al w a y s operate it from
the b ottom at the b eginning. If y ou operate the tool from
the top, the mortar w ill separate and e v entuall y slide to
the b ottom.
Fig.26
Fig.27
NOTE: Vi b rating too long in a single place causes
concrete segregation.
NOTE: When the coarse aggregate segregates w hen
placing concrete, sho v el out the coarse aggregate
and put it w here there is plent y of mortar. T hen use
the tool on it. Don ' t lea v e coarse aggregate in the
segregated condition.
Fig.28
MAINTENANCE
CAUTION:
Al w ays be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
Avoid cleaning the tool in w ater. Water
w ill get into the motor housing and cause motor
failure.
NOTICE:
Use a w et cloth or the like to carefully
wipe off any wet concrete left on the tool after
use. Extra care should be given to thorough
cleaning of the vents, s w itch area, cover open-
ings, etc.
T o maintain product S AF E T Y and R E LIABILI T Y ,
repairs, any other maintenance or adjustment should
b e performed b y Makita Authorized or Factor y S er v ice
C enters, al w a y s using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use w ith your Makita tool
specified in this manual. T he use of an y other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If y ou need an y assistance for more details regard-
ing these accessories, ask y our local Makita S er v ice
C enter.
ø mm x 1. m flexible shaft
ø mm x 1. m flexible shaft
ø mm x . m flexible shaft
ø 8 mm x 1. m flexible shaft
ø 8 mm x . m flexible shaft
• Batter y case L
• Batter y case H
• S houlder strap
• Makita genuine b atter y and charger
NOTE: S ome items in the list ma y b e included in the
tool package as standard accessories. T he y ma y
di er from country to country.
12 ENGLISH