Softwareversion; Optional Accessories - Makita DMR300 Betriebsanleitung

NOTE: The radio can pair with 8 Bluetooth
at most. When you pair Bluetooth
this number, pairing history will be overwritten from
the oldest pairing history.
NOTE: If there are 2 Bluetooth
your radio, it will show its availability on both devices.
NOTE: If your Bluetooth
connected to your radio, then you need to manually
reconnect your device again to the radio.
NOTE: If the name of your radio is appeared on your
®
Bluetooth device list but your device cannot connect
with it, delete the item name of your radio from your
list and pair the device with your radio again following
the steps described previously.
NOTE: The optimum operation range between the
radio and the paired device is approximately 10
meters (30 feet).
NOTE: Any obstacle between the radio and the
device can reduce the operational range.
Disconnecting your Bluetooth
device
1. Press and hold the Pair button
seconds to disconnect with your Bluetooth® device.
" CONNECTED BLUETOOTH" will turn to be "PAIR
BLUETOOTH".
2. Press the Power button
Language options
For DMR301 only
There are four language options available in the radio:
English, Italian, French, and German.
1. Press the Source button
mode.
2.
Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
3. Rotate the Tuning Control knob
<Language>.
4. Rotate the Tuning Control knob
language and press the Tuning Control knob
System reset
For DMR301 only
If your radio fails to work correctly, or some digits on the
display are missing or incomplete, carry out the follow-
ing procedure.
1. Press the Source button
mode.
2.
Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
3. Rotate the Tuning Control knob
<Factory Reset>. Press the Tuning Control knob
confirm the setting (<Yes>) and a full reset will be
performed.
®
devices
®
devices more than
®
devices searching for
®
device is temporarily dis-
®
for a few
.
to select DAB radio
until <System>
to choose
to choose the
to confirm.
to select DAB radio
until <System>
to choose
Software version
For DMR301 only
1. Press the Source button
mode.
2. Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
3.
Rotate the Tuning Control knob
Version> and press the Tuning Control knob
view the software version installed in the radio.
MAINTENANCE
CAUTION:
ance is switched off and the battery cartridge is
removed before attempting to perform inspection
or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
to
16 ENGLISH
to select DAB radio
until <System>
to choose <SW
Always be sure that the appli-
These accessories or attachments
you will