Herunterladen Diese Seite drucken

Phonocar 04065 Bedienungsanleitung Seite 2

Interface für lenkrad-steuerungen
Vorschau ausblenden Andere Handbücher für 04065:

Werbung

04065
IT - AVVERTENZE
LEGGERE ATTENTAMENTE IL PRESENTE MANUALE ISTRUZIONI PRIMA DI PROCEDERE ALL'INSTALLAZIONE.
Phonocar S.p.A. declina ogni responsabilità per danni derivanti da un'installazione o da un utilizzo improprio del prodotto.
1) L'installazione deve essere eseguita da personale qualificato.
2) Effettuare l'installazione in ambiente asciutto e privo di polvere.
3) Posizionare i cavi lontano da altri oggetti per evitare che possano impigliarsi, schiacciarsi o rovinarsi.
4) Effettuare i collegamenti in modo che i cavi non vengano piegati e non siano a contatto con parti metalliche per evitare che possano
rompersi.
5) Non smontare né modificare l'interfaccia.
6) Installare l'interfaccia solo su veicoli con batteria 12V.
7) Usare fusibili di ricambio di amperaggio corretto.
8) Verificare che tutti i collegamenti siano stati effettuati correttamente.
Phonocar S.p.A. declina ogni responsabilità derivante da eventuali modifiche al colore dei cavi e alla definizione dei PIN effettuate
dal costruttore del veicolo.
EN - WARNINGS
READ THESE INSTRUCTIONS CAREFULLY BEFORE IN-STALLATION.
Phonocar S.p.A. declines any responsibility for dam-age resulting from improper installation or use of this product.
1) The installation must be carried out by qualified personnel.
2) Carry out the installation in a dry and dust-free envi-ronment.
3) Place cables away from other objects to prevent them from becoming entangled, pinched or damaged.
4) Make the connections in such a way that the cables are not kinked and do not come into contact with metal parts to prevent them from
breaking.
5) Do not open or modify the interface.
6) Only install the interface on vehicles with a 12V bat-tery.
7) Use spare fuses of the correct amperage.
8) Check that all connections have been made correct-ly.
Phonocar S.p.A. declines all responsibility for any changes in cable colour and PIN definition made by the vehicle manufacturer.
FR - ATTENTION
POUR UNE INSTALLATION CORRECTE, SUIVRE AT-TENTIVEMENT LES INDICATIONS DE CETTE NOTICE D'UTILISATION.
Phonocar S.p.A n'est en aucun cas responsable des dommages causées par une mauvaise installation et utilisation du produit.
1) L'installation doit être faite par un professionnel.
2) La zone d'installation doit être sec et propre.
3) Éloigner les câbles des autres objets pour éviter qu'ils s'emmêles, se plient ou s'endommagent.
4) Faire les branchements en faisant attention à ne pas plier les câbles. Éviter le contact entre les câbles et les parties métalliques car ils
risquent de se casser.
5) Ne pas ouvrir ni modifier l'interface.
6)Installer l'interface uniquement sur les véhicules équipés d'une batterie de 12 V.
7) Utiliser les fusibles de rechange dont l'ampérage est correct.
8) Vérifier que tous les branchements soient cor-rects.
Phonocar Spa n'est pas responsable des éventuels changements des couleurs des câbles et de la dé-finition des PIN effectués par les industries
auto-mobiles.
DE - WARNHINWEISE
LESEN SIE DIESE BEDIENUNGSANLEITUNG VOR DER INSTALLATION SORGFÄLTIG DURCH.
Phonocar S.p.A. kann keine Haftung für Schäden übernehmen, welche durch unsachgemäße
1) Installation oder Nutzung verursacht wurden.
2) Anschlüsse und Installation müssen von geschultem Fachpersonal durchgeführt werden.
2

Werbung

loading