Makita DHR164 Betriebsanleitung Seite 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 Lock button
11 Rotation with hammering
12 Action mode changing knob
SPECIFICATIONS
Model
Concrete
Capacities
No load speed
Blows per minute
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and
chargers may cause injury and/or fire.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Explanation of general view
13 Rotation only
14 Grip base
15 Side grip
16 Loosen
17 Tighten
18 Teeth
19 Protrusion
20 Bit shank
21 Bit grease
22 Bit
23 Chuck cover
24 Depth gauge
Steel
Wood
D.C.14.4 V Model
D.C.18 V Model
DHR164
16 mm
13 mm
24 mm
0 – 1,600 min
0 – 5,300
297 mm
D.C. 14.4 V
2.2 – 2.9 kg
ENE042-1
General power tool safety warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
25 Dust cup
26 Blow-out bulb
27 Chuck adapter
28 Keyless drill chuck
29 Sleeve
30 Ring
31 Limit mark
32 Holder cap cover
33 Recessed part
34 Brush holdre cap
35 Screwdriver
DHR165
–1
D.C. 18 V
2.3 – 3.0 kg
BL1415N / BL1430B / BL1440 / BL1460B
BL1815N / BL1820B / BL1830B / BL1840B
/ BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD /
DC18SE / DC18SF / DC18SH / DC18WC
GEA010-2
5