Brush Heads - Braun Oral-B iO 3786 Bedienungsanleitung

the toothbrush is awake (display turned on). Select
a mode by pressing the on/off button (7). Your
toothbrush starts in the selected default mode. You
may also change modes during brushing.
Note: You may also customise mode settings via
Oral-B App.
Interactive Display
Activate the interactive display (4) by picking-up
the toothbrush, lifting it off the charger or pressing
the on/off button (7).
(10-16) «Mode selection» – toggle by pressing the
mode button and select default start mode with
on/off button.
(17) «Settings» – toggle through all modes until
you reach the option «Settings»; to enter press the
on/off button:
• (19) manage Bluetooth settings (enable, disable)
• (20) select/change colour of light ring
• (21) select/change language
• (22) perform factory reset
(24) «Timer» – displays brushing time.
(25) «Battery status» – shows battery status after
use, when charging or when battery is low.
(26) «Brush head replacement reminder» –
reminds you when to replace your brush head.
(27) «Brushing feedback» – brushing feedback is
indicated with a smiley face.
When the toothbrush is picked up, lifted off the
iOsense™ charger or when you press the on/off
button the toothbrush handle indicates its
readiness.
«Error messages» – «outside operating limits»: you
are operating or charging outside standard tem-
perature range.

Brush heads

Oral-B offers you a variety of different Oral-B iO
brush heads (f/g) that only fit your Oral-B iO
toothbrush handle and can be used for tooth-by-
tooth precision cleaning.
Most iO Oral-B brush heads feature INDICATOR
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day
for two minutes, the bristle colour will fade half-
way approximately within 3 months, indicating
the need to exchange your brush head. If the
bristles splay before the colour recedes, you may
exert too much pressure on teeth and gums. In
general, we recommend replacing the brush
head every 3 months.
22
Brush Head Replacement Reminder
The toothbrush is equipped with a «Brush Head
Replacement Reminder» on the interactive
display, indicating the need to exchange the
brush head approximately after 3 months when
used twice per day.
To reset the «Brush Head Replacement
Reminder» follow the instructions on the display.
Note: You may also customise the brush replace-
ment settings via the Oral-B App.
Connecting your iO
toothbrush to your
Smartphone/Oral-B App
The Oral-B App offers various features:
• Personalise your toothbrush settings (e.g.
choose your preferred light ring colour, adjust
stutter timer, brush mode sequence or brush
replacement reminder settings)
• Track your brushing behaviour (e.g. brushing
time and applied pressure)
• Real-time brushing recognition to help you
brush every area for the right amount of time.
The Oral-B App is available for smartphones run-
ning iOS or Android™ operating systems. Check
app.oralb.com for compatible smartphones and
country availability of the Oral-B App. It can be
downloaded for free from App Store
Play store™ or you may scan the QR code on the
cover page of this manual (c).
• Launch the Oral-B App. It will guide you through
the entire Bluetooth pairing procedure. You may
also pair new devices at any time in the Oral-B
App´s settings.
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smartphone
(for directions please refer to your
smartphone's user manual).
• You may change Bluetooth settings on your
toothbrush via the display -> Settings ->
Bluetooth enable/disable.
• Keep your smartphone in close proximity (within
® 5m distance) when using it with the toothbrush.
Make sure the smartphone is safely positioned
in a dry place.
Note: Your smartphone must support Bluetooth
4.2 (or higher) / Bluetooth Smart in order to pair
your toothbrush.
Caution: Follow your smartphone's user manual
to ensure your phone/ charger is designed for use
in a bathroom environment.
(SM) / Google