First Use - Braun Oral-B iO 3786 Bedienungsanleitung

• When unplugging, always pull the power plug
instead of the cord. Do not touch the power
plug with wet hands. This can cause an electric
shock.
• If you are undergoing treatment for any oral
care condition, consult your dental professional
prior to use.
• This toothbrush is a personal care device and is
not intended for use on multiple patients in a
dental practice or institution. For hygienic
reasons we recommend the use of individual
brush handles and brush heads for each family
member.
• Small parts may come off, keep out of reach of
children.
To avoid brush head breakage which may generate
a small parts choking hazard or damage teeth:
• Prior to each use, ensure the brush head fits
well. Discontinue use of the toothbrush, if brush
head no longer fits properly. Never use without
a brush head.
• If the toothbrush handle is dropped, the brush
head should be replaced before the next use
even if no damage is visible.
• Replace brush head every 3 months or sooner if
brush head becomes worn.
• Clean brush head properly after each use (see
«Cleaning recommendations» paragraph).
Proper cleaning ensures the safe use and
functional life of the toothbrush.
Important Information
• This toothbrush, charger and pouch
(accessory) contain NdFeB magnets and
generate magnetic fields. If you use a medical
device or have an implanted medical device,
consult with the medical device manufacturer or
a physician, if you have questions about safely
using your toothbrush.
• To avoid electromagnetic interference and/or
compatibility conflicts, disable Bluetooth on
your toothbrush handle (5) and Bluetooth/ Wi-Fi
on your iOsense™ charger before using it in
restricted surroundings, such as aircrafts or
specially marked areas in hospitals.
• Disable Bluetooth by entering the «Settings»
menu on the interactive display (4) -> Bluetooth
-> disable. Follow the same procedure to
enable Bluetooth again. Disable Bluetooth/
Wi-Fi on your iOsense™ charger by entering low
power mode by tapping the iOsense™ button
twice (d). Tap the button once again to enable
Bluetooth/ Wi-Fi.
20
• Persons with pacemakers should always keep
the toothbrush more than 15 centimetres (six
inches) from the pacemaker while turned on.
Anytime you suspect interference is taking
place disable Bluetooth.
Specifications
For voltage specifications refer to the bottom of
the charging unit.

First use

Please wake up your iO toothbrush by pressing the
on/off button (7) and follow the instructions on the
interactive display (4) to get started for first time
setup.
If not further instructed on the display, you may
toggle with the mode button (8) and select with the
on/off button (7).
You may change the settings via the «Settings»
menu (17) at any time.
You may connect your iO toothbrush with your
iOsense™ charger by switch on the toothbrush in
close proximity to the plugged-in iOsense™
charger.
Charging and Operating
• To charge the toothbrush battery place the
toothbrush on the iOsense™ charger (6).
• The charge level is indicated on the interactive
display (4). The light ring (3) fades in and out
during charging. Once it is fully charged the
light ring turns off. A full charge typically takes
3 hours.
• If the battery is running low the light ring (3)
blinks quickly in red. Once the battery is empty,
the motor stops; it will need at least a 5-minute
charge for one usage.
Note: In case the battery is empty (display off),
charge for at least 30 minutes.
• You can always store the toothbrush on the
iOsense™ charger to maintain it at full charge; a
battery overcharge is prevented by the device.
Note: Store the toothbrush at room temperature
for optimal battery maintenance.
Caution: Do not expose the toothbrush to tem-
peratures higher than 50 °C / 122 °F.
Using your iO toothbrush
Start Brushing
Place the brush head on the toothbrush handle.
A small gap should remain between handle and