Establish A Wi-Fi Connection With The Devolo Magic 2 Wifi Next - Devolo Magic 2 WiFi next Handbuch

25 Initial use
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
For each pairing operation, only one addi-
tional adapter can be added at a time.
3.4.3Changing the network password
A network password can also be changed in the
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.5 Powerline)
or
b
Using
devolo Home Network App. For more infor-
mation, refer to the chapter. 3.5 Installation of
devolo software
devolo Magic 2 WiFi next
devolo Cockpit or
3.4.4 Establish a Wi-Fi connection with
the devolo Magic 2 WiFi next
Establish the Wi-Fi connection with your laptop,
tablet or smartphone by entering the previously
noted WiFi key as the network security key (see
chapter Wi-Fi on/off)
Integrate the Wi-Fi adapter into an existing Wi-
Fi network
To ensure that the devolo Magic 2 WiFi next has
the same Wi-Fi configuration as your Wi-Fi router,
you can apply the Wi-Fi access data at the touch of
a button using the WiFi Clone function. This can
be enabled in different ways:
Activating WiFi Clone:
the
b
Activating WiFi Clone by pressing a button:
Briefly press the PLC button on your devolo
Magic WiFi adapter. After the button is pres-
sed, the LED flashes white. Press the WPS but-
ton on your router within 2 minutes. Please
consult your router's instruction for use to find
out how long to press the button for.
or
b
Activating WiFi Clone from the web interface.
More information about this function can be
found in Chapter WiFi Clone.