Devolo Magic 2 WiFi next Handbuch Seite 102

43 Network configuration
stead, you must assign it separately to each of
your devolo Magic adapters.
Powerline domain name
The Powerline domain name specifies the name of
your PLC network.
Master selection
The function can be used to improve the quality of
the network.
b
Preferred
devolo Magic adapter connected directly to
the router; this option is useful if the main task
of this devolo Magic adapter is to connect to
the
devolo Magic adapter in the PLC network com-
municates directly with it. Each adapter of the
PLC network must be within the range of the
adapter on the router.
b
Automatic: master mode is assigned sponta-
neously depending on the current connection
quality; the devolo Magic adapter with the
strongest connection is selected.
devolo Magic 2 WiFi next
at gateway:
router/internet while
Unpairing – Removing an adapter from a net-
work
1
To remove a devolo Magic adapter from your
devolo Magic network, click Leave Powerline
network.
2
Wait until the LED flashes red and then dis-
connect the devolo Magic adapter from the
mains supply.
Compatibility mode
defines the
Using as VDSL connection may negatively impact
the performance of the bandwidth connection by
crosstalk of the signal.
any other
In order to mitigate any potential negative effects
the device provides the following options:
Automatic compatibility mode
If the option Automatic compatibility mode (re-