Landing Gear Removal - Horizon Hobby E-FLITE UMX P-51D Voodoo Bedienungsanleitung

Landing Gear Removal

Main Gear
1. Carefully unclip the landing gear cover from the strut,
then pull it down and away from the wing.
2. Carefully rotate each strut until it snaps away from the
gear plate.
NOTICE: DO NOT damage the leading edge of the wing
when removing the landing gear.
3. Pull the landing gear strut out of the mounting plate
hole.
When needed, assemble in reverse order.
Tail Wheel
1. Pull the tail wheel assembly out of the plastic tail
wheel mount on the bottom of the fuselage.
When needed, assemble in reverse order.
EN
9