OHAUS TD52 Bedienungsanleitung Seite 5

5. Connect the USB Host Cable to the 9 Pin connector on the option board.
6. Plug the USB Flash Drive, the Barcode Scanner or the RFID device in and put the interface
optional cover back to the indicator. To use the USB Flash Drive, we recommend to use
the USB storage capacity less than or equal to 32G and the size of the drive within 60mm x
22mm x 12mm.
EN-3
9 Pin
connector
Bolts
USB Flash Disk,
Barcode Scanner or
RFID
or RFID