Vermeiren Albatros II Gebrauchsanweisung Seite 23

9.
bottom position . Fasten the pen on the
top end of the pole in the hole of the
cantilever arm .
10. Remove the safety spindle (locking pin) from the bottom
end of the pole by gently pressing the button at the head of
the spindle. The safety spindle can now be removed easily.
L WARNING: Risk of injury - Once the pole is
11.
unlocked, its own weight can cause considerable
downward forces to be exerted.
Pull out the standing position safety (traction screw) until the
pole is released and can be tilted. The pole can now be tilted
forwards.
Tip the pole as far as possible forward.
12. L WARNING: Risk of injury - Make sure that the safety
spindle is correctly inserted.
Fix the pole in place by pushing the safety spindle at the end
of the pole in with the pushbutton depressed until its other
end clearly protrudes. Release the pushbutton on the safety
spindle and check that it cannot be pulled out again.
19
Installation and adjustment
Move the cantilever arm to the
EN
Albatros II
2022-08
NL