Safety Instructions; Product Description And Specifications; Intended Use; Product Features - Bosch Intuvia 100 Benutzerhandbuch

Safety instructions

Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
The term battery is used in these instructions to mean all
original Bosch eBike rechargeable battery packs.
Read and observe the safety warnings and directions
u
contained in all the eBike system operating instruc-
tions and in the operating instructions of your eBike.
Do not attempt to secure the display or operating unit
u
while riding.
The push assistance function must only be used when
u
pushing the eBike. There is a risk of injury if the wheels
of the eBike are not in contact with the ground while using
the push assistance.
When the push assistance is activated, the pedals may
u
turn at the same time. When the push assistance func-
tion is activated, make sure that there is enough space
between your legs and the turning pedals to avoid the risk
of injury.
When using the walk assistance, make sure that you
u
can control the eBike and that you can hold it securely
at all times. Under certain circumstances, the walk as-
sistance may stop (e.g. if the pedals hit an obstacle or if
you accidentally let go of the button on the operating
unit). The eBike may suddenly move backwards onto you
or tip up. This presents a risk for the user particularly if
there is additional load on the eBike. When using the walk
assistance, do not bring the eBike into situations in which
you cannot hold the eBike using your own strength.
Do not stand your bicycle upside down on its handle-
u
bars and saddle if the operating unit or its holder pro-
trude from the handlebars. This may irreparably dam-
age the operating unit or the holder.
Do not connect a charger to the eBike system if the
u
eBike system displays a critical error. This may result in
damage to your battery. The battery may catch fire,
thereby resulting in serious burns and other injuries.
The operating unit features a wireless interface. Local
u
operating restrictions, e.g. in aeroplanes or hospitals,
must be observed.
Caution! When using the operating unit with Bluetooth®,
u
this may cause interference that affects other devices and
systems, aeroplanes and medical devices (e.g. pace-
makers, hearing aids). Likewise, injury to people and an-
imals in the immediate vicinity cannot be excluded en-
tirely. Do not use the operating unit with Bluetooth® in the
vicinity of medical devices, petrol stations, chemical
plants, areas with a potentially explosive atmosphere or
on blast sites. Do not use the operating unit with
Bluetooth® in aeroplanes. Avoid operation near your body
for extended periods.
Bosch eBike Systems
The Bluetooth® word mark and logos are registered trade-
u
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Bosch eBike Systems is under licence.
Observe all national regulations which set out the ap-
u
proved use of eBikes.
Privacy notice
When you connect the eBike to the Bosch Dia-
gnosticTool 3, data about Bosch drive unit (e.g. energy con-
sumption, temperature, etc.) is transferred to Bosch eBike
Systems (Robert Bosch GmbH) for the purposes of product
improvement. You can find more information about this on
the Bosch eBike website at www.bosch-ebike.com.
Product description and
specifications

Intended use

The LED Remote operating unit is designed to control a
Bosch eBike system and control an on-board computer. You
can also use it to change the assistance level in the eBike
Flow app.
So as to be able to use the operating unit fully, a compatible
smartphone with the eBike Flow app is required.
The eBike Flow app can be accessed via Bluetooth®.
Depending on the smartphone's operating sys-
tem, the eBike Flow app can be downloaded
free of charge from the Apple App Store and
the Google Play store.
Use your smartphone to scan the code in order to download
the eBike Flow app.

Product features

The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
All illustrations of bike parts except for the drive unit, on-
board computer (including operating unit), speed sensor
and the corresponding holders are a schematic representa-
tion and may differ on your eBike.
(1) On/off button
(2) Select button
(3) LEDs for battery charge indicator
(4) ABS LED (optional)
(5) Assistance level LED
(6) Holder
(7) Diagnostics connection (for servicing purposes
only)
(8) Button for decreasing support level –/
walk assistance
(9) Button for increasing support level +/
bike lights
67
English – 1
0 275 007 3RL | (09.03.2022)