Safety Instruction; Scope Of Delivery - Solplanet ASW LT Serie Schnellinstallationsanleitung

I. Safety Instruction
1. The contents of this document may be updated due to product upgrades or other reasons.
Unless otherwise specified, this document only works as guide. All statements, information and
suggestions in this document do not constitute any guarantee.
2. This product can only be installed, commissioned, operated and maintained by technicians who
have carefully read and fully understood the user manual.
3. This product must only be connected with PV modules of protection class II (in accordance with
IEC 61730, application class A). PV modules with a high capacitance to ground must only be
used if their capacity does not exceed 1μF. Do not connect any sources of energy other than
PV modules to the product.
4. When exposed to sunlight, the PV modules generate dangerous high DC voltages which is
present in the DC cable conductors and live components. Touching live DC cable conductors
and live components can result in lethal injuries due to electric shock.
5. All components must remain within their permitted operating ranges at all times.
6. The product complies with Electromagnetic compatibility 2014/30/EU, Low Voltage Directive
2014/35/EU and Radio Equipment Directive 2014/53/EU.
II. Mounting environment
1. Ensure that the inverter is installed out of the reach of children.
2. To ensure best operating status and prolonged service life, the
ambient temperature of the location should be ≤40°C.
3. To avoid direct sunlight, rain, snow, pooling of water on the inverter, it is
suggested to mount the inverter in places which are shaded during the majority
of the day or to install an external cover that provides shade for the inverter.
Do not place a cover directly on top of the inverter.
4. The mounting condition must be suitable for the weight and size of the inverter. The inverter
is suitable to be mounted on a solid wall that is vertical or tilted backwards (Max. 15°). It is not
recommended to install the inverter on walls made of plasterboards or similar materials.
The inverter may emit noise during operation.
5. To ensure adequate heat dissipation, the recommended clearances between
the inverter and other objects is shown in the image to the right:
III. Scope of delivery
1