Duc307 Duc357 Duc407 - Makita DUC307 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length
(without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar length
Applicable saw chain type
(refer to the table below)
Sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
*1
*2
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
DUC307
300 mm
46
300 mm
275 mm
BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
9 ENGLISH
DUC357
428 mm
D.C. 18 V
2.9 kg
4.2 - 4.3 kg
350 mm
300 - 400 mm
90PX
6
3/8"
0 - 7.7 m/s
(0 - 460 m/min)
3
150 cm
90PX
52
350 mm
330 mm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"
DC18SH
PDC01
DUC407
400 mm
56
400 mm
370 mm