Troubleshooting; Storage; Disposal; Technical Specifications - Spring PROFESSIONAL Gebrauchsanweisung

11

troubleshooting

Disorder:
The food dehydrator PROFESSIONAL does not heat.
Possible cause
1. No supply voltage
2. Internal defect
troubleshooting
1. Insert the mains plug of the device into a suitable socket. Make sure that the power outlet carries the required
voltage.
2. The appliance is defective. Contact your sales or service center.
If you have any problems or questions, please contact your local point of sale or directly:
Spring International GmbH
Höhscheider Weg 29
D-42699 Solingen
Germany
www.spring.ch
12

storage

Store the food dehydrator PROFESSIONAL in a dry location as well as out of reach of children.
13

Disposal

At the end of its usable life, the food dehydrator PROFESSIONAL must be disposed of properly. The food dehydrator
PROFESSIONAL contains electrical and electromechanical components. Follow the regulations in your country.
When disposing of it, ensure that the food dehydrator PROFESSIONAL cannot be operated again by third parties.
14

technical specifications

Description
Plug
Voltage
Frequency
Power output
Measurements L × W × H
Length of lead
Translation are made in good faith. We do not assume any liability for translation errors. Solely the German text is
binding.
36
food dehydrator Professional
2-pin grounded (EU)
220 - 240 V
50/60 Hz
550-650 W
340 mm × 450 mm × 310 mm
1.0 metres