Herunterladen Diese Seite drucken

Installation Du Logiciel - Epson SC-F9400H-Serie Installationshandbuch

Werbung

EN
Installing the Software
IT
Installazione del software
Installing the Essential Software
Installation du logiciel indispensable
Installation der grundlegenden Software
De belangrijke software installeren
Installazione del software essenziale
Instalación del software básico
Instalar o Software essencial
FR

Installation du logiciel

ES
Instalación del software
ON
USB
DE
Installation der Software
PT
Instalar o Software
Ready the printer and computer for connection before proceeding, but do not connect the
cables until the installer prompts you to do so. The essential software will not be installed if
the devices are not connected according to the on-screen instructions.
Préparez l'imprimante et l'ordinateur pour la connexion avant la procédure, mais ne
connectez pas les câbles avant que le programme d'installation ne vous demande de le
faire. Le logiciel indispensable ne sera pas installé si les appareils ne sont pas connectés
conformément aux instructions à l'écran.
Network
Bereiten Sie den Drucker und den Computer auf die Verbindung vor, bevor Sie fortfahren,
verbinden Sie jedoch die Kabel nicht, bis das Installationsprogramm Sie dazu auffordert.
Die grundlegende Software wird nicht installiert, wenn die Geräte nicht gemäß der
Bildschirmanweisungen verbunden sind.
Zorg dat de printer en computer gereed zijn om aan te sluiten voordat u doorgaat, maar sluit
de kabels pas aan wanneer het installatieprogramma deze opdracht geeft. De belangrijke
software wordt niet geïnstalleerd als de apparaten niet worden aangesloten volgens de
instructies op het scherm.
Prima di procedere, preparare la stampante e il computer per la connessione ma non
collegare i cavi fino a quando il programma di installazione richiede di farlo. Il software
essenziale non verrà installato se i dispositivi non vengono connessi seguendo le istruzioni
visualizzate sullo schermo.
Prepare la impresora y el ordenador para su conexión antes de proceder pero no conecte
los cables hasta que el instalador se lo indique. El software básico no se instalará si los
dispositivos no están conectados según las instrucciones en pantalla.
Prepare a ligação da impressora e do computador antes de continuar, mas não desligue os
cabos até que o instalador indique para o fazer. O software essencial não será instalado se os
dispositivos não estiverem ligados de acordo com as instruções no ecrã.
NL
De software installeren
29

Werbung

loading

Diese Anleitung auch für:

Sc-f9400-serie