Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Anti-freeze mode
The heater has an anti-freeze function. If room temperature is lower than 5 C, the heater
will enter this mode and show
o
than 8 C, the anti-freeze mode will stop.
9. Reset to factory settings
When in standby, hold
10. Additional instructions
If there is no operation after 30 seconds, the screen will turn off and confirm whatever
setting that was currently on the unit.
If room temperature is 2 C lower than set temperature, it will start heating. If room
o
temperature is 1 C higher than set temperature, it will stop heating.
1. Before cleaning, unplug and let the unit cool down completely.
2. Occasionally wipe the unit's surface with a damp cloth (not too wet). Ensure the surface
is dry before using.
WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and abrasives. Do not allow the
interior to get wet as this could cause a hazard.
3. Remove dust with a dry cloth.
4. Store the heater in its original package, ensuring it is in a clean and dry place.
5. If there are any damages or malfunctions, do not repair the heater by yourself. This is a
safety hazard.
This product is CE marked to denote conformity with Directives 73/23/EEC (Low Voltage)
and 89/336/EEC (Electromagnetic Compatibility), as amended.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for recycling advice.
on the screen. When the room temperature is higher
for 10 seconds – it will return to the factory settings.
o
Maintenance
CONFORMITY WITH DIRECTIVES
28
o
Werbung
Inhaltsverzeichnis
