Please note, the nine default programmes include settings, so you might not need to
change them. Settings for the nine programmes are as follows:
P1: comfort mode 6:00-22:00, the others are all ECO mode.
P2: comfort mode 19:00-6:00, the others are all ECO mode.
P3: comfort mode 6:00-9:00 and 16:00-22:00, the others are all ECO mode.
P4: comfort mode 6:00-9:00, 12:00-14:00 and 16:00-22:00, the others are all ECO mode.
P5: all ECO mode.
P6: all comfort mode.
P7: comfort mode 16:00-22:00, the others are all ECO mode.
P8: comfort mode 6:00-12:00, the others are all ECO mode.
P9: comfort mode 8:00-17:00, the others are all ECO mode.
7. Open window function
The Open window function is optional. When on standby, hold
the
open window function, then press
and off will show
When the open window function is on, if you open a window widely near the heater, a
sensor will detect the sharp drop in temperature. If it drops by 2 C within five minutes, the
function will start and the heater will enter the anti-freeze mode and stop heating – it will
show
on the screen.
The heater will restart automatically after 65 minutes, however you can manually restart
the heater by pressing
return to the previous mode set.
or
to set on or off. When on, it will show
- the heater will be on standby. Press
27
for three seconds to start
o
again, the heater will