How to use
1. Turn on
Plug in and switch on the unit, then press on/off button
start on comfort mode and on a low power setting. The default temperature is 22 C.
2. Power setting
Press
to set the power. There are two settings,
power.
3. Ion setting
Press
to start the ion function – it will show
4. Temperature setting
Press
, then press
temperature – the set temperature will only show when setting it. The set temperature will
be confirmed after 10 seconds, then it will switch to showing the room temperature
automatically. Temperature range is between 5-35℃.
5. Mode setting
There are two modes - comfort
Press
to switch modes.
6. Time and week timer setting
(1)
(2)
●
Press
to start the week timer mode (screen
●
Then hold
for three seconds (screen
set an hour.
●
Press
again (screen
minute.
again (screen ④) – the week (1- 7 means Monday to Sunday) setting will flash,
● Press
use
or
to set week.
again (screen ⑤), use
● Press
programmes, P1-P9) for Monday (1). Please note, the P1 - P9 icon won't flash during
this step.
● Press
again (screen
these steps until you reach Sunday, then press
● Please note, you can change the settings for the programmes. Under screen ⑤,
for three seconds (screen ⑦). P1 will flash, then press
hold
setting by one hour. Pressing
will enter ECO mode and will show
to return to screen ⑤, then hold
press
select P2. Press
completing P9, then press
or
to set the target temperature. The unit shows the room
and ECO
(3)
③
) – the minute setting will flash, use
or
⑥
), use
or
to select a programme for Tuesday (2). Repeat
will enter comfort mode and will show
(blank). After the settings of P1 are changed,
or
to change its default setting. Repeat this process until
to exit.
. For first time use, it will
is low power and
on the screen.
. The temperature can be set separately.
(4)
(5)
①
).
②
) – the hour setting will flash, use
to select a programme (there are nine
to exit.
for three seconds again, then press
26
o
is high
(6)
(7)
or
or
to set the
or
to change the
. Pressing
to
to