Video Features - exone go Handbuch

Video Features

The system features an Intel integrated GPU. You can
switch display devices, and configure display options,
from the Display control panel in Windows as long as the
video driver is installed.
To access the Display control panel in Windows:
1. Right-click the desktop and select Display settings from the
menu.
2. Choose the required display settings from the menus.
To access the Intel® Graphics Command Center:
1. Access the Intel® Graphics Command Center from the Start
menu in Windows
14
Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or external monitor port. See your
display device manual to see which formats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 3 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Press the
.
3. Click on any one of the options from the menu to select PC
screen only, Duplicate, Extend or Second screen only.
4. You can also click Connect to a wireless display at the bottom
of the Project screen and follow the steps to connect to any
wireless enabled display.
/ + P (or Fn + F7) key combination.
Figure 10
Project