Seite 1
Universelles Notebook-Handbuch www.exone.de...
Seite 3
Contents Systemübersicht: Ansicht von vorne, links und rechts (Modell B) ....42 Systemübersicht: Ansicht von unten und hinten (Modell A) ......43 About this Concise User Guide ................1 Systemübersicht: Ansicht von unten und hinten (Modell B) ......44 System Startup ....................4 Control Center ....................
Seite 4
Module Bluetooth (Option) ................79 Sommario TPM (Option) ....................80 Informazioni su questa guida rapida .............. 113 Dépannage ......................81 Guida di avvio rapido ..................116 Spécifications ....................82 Configurazione RAID ..................117 Descrizione del sistema: Vista anteriore con lo schermo aperto Contenidos (Modello A) ....................119 Acerca de esta Guía del Usuario Concisa ............85 Descrizione del sistema: Vista anteriore con lo schermo aperto (Modello B) ....................
Seite 5
About this Concise User Guide This quick guide is a brief introduction to getting your system started. This is a supplement, and not a substitute for the expanded English language User’s Manual in Adobe Acrobat format on the Device Drivers & Utilities + User’s Manual disc supplied with your computer.
Seite 6
Instructions for Care and Operation Safety Information • Only use an AC/DC adapter approved for use with this computer. The computer is quite rugged, but it can be damaged. To pre- • Use only the power cord and batteries indicated in this manual. vent this, follow these suggestions: Do not dispose of batteries in a fire.
Seite 7
Polymer/Lithium-Ion Battery Precautions Model Differences Note the following information which is specific to Polymer/ This notebook series includes different models that vary Lithium-Ion batteries only, and where applicable, this over- slightly in design style, color and general appearance. rides the general battery precaution information. Note that though your computer may look slightly differ- •...
Seite 8
System Startup 1. Remove all packing materials. 2. Place the computer on a stable surface. 3. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports. 4. When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below):...
Seite 9
RAID Setup Your solid state drives (SSDs) can be set up in RAID RAID Level Description mode (for increased performance or protection). Note Identical drives reading and writing data in par- that setting up your solid state drives in RAID mode RAID 0 allel to increase performance.
Seite 10
Intel® Rapid Storage Technology (IRST) driver. • RAID 1 (Mirror) • RAID 5 (Parity) 11. Go to any of the disks listed under Select Disks: and select a disk name. 12. Click on X to select the disk required.
Seite 11
System Map: Front View with Display Open (Model A) Design I Design II 15.6" (39.62cm) 15.6" (39.62cm) Figure 2 - Front View with Display Open (Model A) 1. Webcam 4. Display 2. *Webcam LED 5. Power Button *When the webcam is in use, the 6.
Seite 12
System Map: Front View with Display Open (Model B) Figure 3 Front View with Display Open 1. Webcam 2. *Webcam LED *When the webcam is in use, the LED will be illuminated. 3. Built-In Array Microphone 4. Display 5. Power Button 6.
Seite 13
LED Indicators The LED indicators on the computer display helpful information about the current status of the computer. Icon Color Description Orange The AC/DC Adapter is Plugged In Green The Computer is On Blinking Green The Computer is in Sleep Mode Orange The Battery is Charging Green...
Seite 14
Keyboard Your notebook comes with a multi-color LED keyboard. You can change the color for the multi-color LED keyboard. The keyboard has a numeric keypad for easy numeric data input. Pressing Num Lk turns on/off the numeric keypad. It also features function keys to allow you to change operational features instantly. Num Lk &...
Seite 15
Function Keys & Visual Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations, some visual indicators are available when the Control Center driver is installed. Keys Function/Visual Indicators Keys...
Seite 16
System Map: Front, Left & Right Views (Model A - Design I) Front Left Right Figure 5 - Front, Left & Right Views (Model A - Design I) 1. LED Indicators 8. USB 3.2 Gen 2 Type-C Port with Power Delivery (DC-In)* *This port allows you to use a third party AC/DC adapter/ 2.
Seite 17
System Map: Front, Left & Right Views (Model A - Design II) Front Left Right Figure 6 - Front, Left & Right Views (Model A - Design II) 1. LED Indicators 8. USB 3.2 Gen 2 Type-C Port with Power Delivery (DC-In)* *This port allows you to use a third party AC/DC adapter/ 2.
Seite 18
System Map: Front, Left & Right Views (Model B) Front Left Right Figure 7 - Front, Left & Right Views (Model B) 1. LED Indicators 8. USB 3.2 Gen 2 Type-C Port with Power Delivery (DC-In)* *This port allows you to use a third party AC/DC adapter/ 2.
Seite 19
System Map: Bottom & Rear Views (Model A) Design I Design II Figure 8 Bottom & Rear Views (Model A) Bottom Cover Removal Warning 1. Vent Do not remove any cover(s) and/or screw(s) for 2. Speakers the purposes of device upgrade as this may vio- 3.
Seite 20
System Map: Bottom & Rear Views (Model B) Figure 9 Bottom & Rear Views (Model B) 1. Vent 2. Speakers 3. RJ-45 LAN Jack 4. HDMI-Out Port 5. DC-In Jack 6. DisplayPort 1.4 over USB 3.2 Gen 2 Type-C Port ...
Seite 21
Control Center . You can also press the Fn + Esc key combi- Run the Control Center from the Start menu in Windows nation, or double-click the icon in the notification area of the taskbar to access the Control Center. The Control Center provides quick access to Power Modes, Fan settings, LED Keyboard configuration and the Flexikey appli- cation.
Seite 22
Windows 11 Start Menu, Context Menu, Taskbar, Control Panel and Settings Figure 10 Start Menu, Most of the apps, control panels, utilities and programs within Windows 11 can be Context Menu, accessed from the Start Menu by clicking the icon in the taskbar in the lower Taskbar, Con- left corner of the screen (or by pressing the Windows Logo Key...
Seite 23
Video Features NVIDIA Advanced Optimus Capable (Switchable Display) The system features both an Intel’s Integrated GPU (for power-saving) and an NVIDIA’s discrete GPU (for per- Your computer features a dedicated Discrete Graphics formance). You can switch display devices, and configure Mode Discrete GPU only , and a Microsoft Hybrid...
Seite 24
Display Devices To configure the displays using the Display control panel: 1. Attach your external display(s) to the appropriate port, and turn Note that you can use external displays connected to the it(them) on. HDMI-Out port and/or DisplayPort over USB 3.2 Gen 2 2.
Seite 25
Audio Features Power & battery The Power & battery control panel allows you to quickly You can configure the audio options on your computer adjust power options for Screen and sleep, Power mode, from the Sound control panel in Windows. Access the Battery saver and Battery usage etc.
Seite 26
Note: If you need to reinstall any driver, you should uninstall the driver first . Latest Updates After installing all the drivers make sure you enable Check for updates (Settings > Windows Update) and go to the Microsoft Store and click Downloads and updates > Get updates to update all Apps etc.
Seite 27
Wireless LAN Module (Option) Bluetooth Module (Option) Make sure the Wireless LAN module is turned on (and not Make sure the Bluetooth module is turned on (and not in in Airplane Mode) before configuration begins. Airplane Mode) before configuration begins. WLAN Configuration in Windows Bluetooth Configuration in Windows 1.
Seite 28
TPM (this will probably require a restart of the computer and confirmation of the setting changes after restart by 1. Go to the Control Panel. pressing the appropriate F key). 2. Click BitLocker Drive Encryption (System and Security).
Seite 29
Troubleshooting Problem Possible Cause - Solution The Wireless LAN/Bluetooth The modules are off as the computer is in Airplane Mode. Use the Fn + F11 key modules cannot be detected. combination to toggle Airplane Mode on/off (see Table 4 on page 11).
Seite 30
To find out which CPU is installed on Model A One USB 3.2 Gen 1 Type-A Port your system go to the Start menu and LCD, 15.6" (39.62cm), 16:9, QHD select Settings, and then select Sys- One USB 3.2 Gen 2 Type-A Port (2560x1440)/FHD (1920x1080) tem and click About.
Seite 31
M.2 Slots Environmental Spec Slot 1 for Combo WLAN and Bluetooth Temperature Module ° ° Operating: 5 C - 35 Slot 2 for PCIe Gen4 x4 SSD Non-Operating: -20°C - 60°C Slot 3 for PCIe Gen4 x4 SSD Relative Humidity Slot 4 for PCIe Gen4 x4 SSD Operating: 20% - 80% Communication...
Seite 33
Über das Ausführliche Benutzerhandbuch Diese Kurzanleitung soll einen Überblick über die Schritte geben, die dazu notwendig sind, das System zu starten. Dieses ist nur eine Ergänzung und kein Ersatz für das erweiterte englischsprachige Benutzerhandbuch, das auf der mitgelieferten Disc Device Drivers & Utilities + User's Manual im Adobe-Acrobat-Format vorliegt. Diese Disc enthält auch die Treiber und Utility-Programme, die für einen einwandfreien Betrieb des Computers notwendig sind (Hinweis: Das Unternehmen behält sich das Recht vor, diese Publikation ohne Vorankündigung zu überarbeiten und den Inhalt zu verändern).
Seite 34
Hinweise zu Pflege und Betrieb • Wenn der Computer heruntergefallen ist oder beschädigt wurde (berüh- ren Sie nicht die giftige Flüssigkeit des Bildschirms). Das Notebook ist zwar sehr stabil, kann aber dennoch be- • Wenn ein ungewöhnlicher Geruch, Hitze oder Rauch aus dem Computer schädigt werden.
Seite 35
Vorsichtsmaßnahmen für Polymer-/Lithium-Ionen Modellunterschiede Akkus Diese Notebookserie umfasste verschiedene Modelle, die Beachten Sie die folgenden Hinweise, die sich speziell auf Poly- sich leicht in Design, Farbe und allgemeinen äußeren mer-/Lithium-Ionen Akkus beziehen. Diese Hinweise haben zu- Merkmalen voneinander unterscheiden. Ihr Modell kann Vorrang gegenüber Allgemeinen...
Seite 36
Schnellstart 1. Entfernen Sie das gesamte Verpackungsmaterial. 2. Legen Sie den Computer auf eine stabile Unterlage. 3. Schließen Sie alle Peripheriegeräte, die Sie mit dem Computer verwenden wollen (z. B. Tastatur und Maus), an die entsprechenden Schnittstellen an. 4. Gehen Sie bei der erstmaligen Einrichtung des Computers wie folgt vor (um den Computer während des Versands zu schützen, wird der Akku das System nicht mit Strom versorgen, bis es das erste Mal mit dem AC/ DC-Adapter verbunden und wie folgt erstmalig eingerichtet worden ist):...
Seite 37
RAID Setup Die Solid State Laufwerke (SSDs) können im RAID-Modus RAID-Ebene Beschreibung (für eine erhöhte Leistung oder Sicherheit) eingerichtet wer- Identische Laufwerke lesen und schreiben Daten den. Die Einrichtung der SSDs im RAID-Modus muss vor RAID 0 parallel, um die Leistung zu verbessern. Bei der Installation des Windows-Betriebssystems erfolgen.
Seite 38
RAID Setup-Verfahren 1. Kopieren Sie mit dem Computer aus dem unten angegebenen 15. Wählen Sie Create Volume (stellen Sie sicher, dass Sie Ihre Verzeichnis (D: steht für das DVD-Laufwerk) der Disc Device Dri- Festplatten ausgewählt haben). vers & Utilities + User's Manual den Ordner f6mdflpy-x64 auf 16.
Seite 39
Systemübersicht: Ansicht von vorne mit geöffnetem Bildschirm (Modell A) Design I Design II 15,6" (39,62cm) 15,6" (39,62cm) Abb. 2 - Ansicht von vorne mit geöffnetem Bildschirm (Modell A) 1. Webcam 4. Bildschirm 5. Netzschalter 2. *Webcam LED *Wenn die Webcam verwendet 6.
Seite 40
Systemübersicht: Ansicht von vorne mit geöffnetem Bildschirm (Modell B) Abb. 3 Ansicht von vorne mit geöffnetem Bildschirm (Modell B) 1. Webcam 2. *Webcam LED *Wenn die Webcam verwendet wird, leuchtet die LED. 3. Eingebautes Array-Mikrofon 4. Bildschirm 5. Netzschalter 16" (40,64cm) 6.
Seite 41
LED-Anzeigen Die LED-Anzeigen auf dem Computer zeigen wichtige Informationen über den aktuellen Status des Computers. Symbol Farbe Beschreibung Orange Der AC/DC-Adapter ist angeschlossen Grün Der Computer ist angeschaltet Lampe blinkt grün Das System ist im konfigurierten Energiesparmodus Orange Der Akku wird geladen Grün Der Akku ist voll geladen Lampe blinkt orange...
Seite 42
Tastatur Ihr Notebook wird mit einer mehrfarbigen LED-Tastatur geliefert. Sie können die Farbe für die mehrfarbige LED-Tastatur ändern. Die Tastatur hat eine eingebettete Nummerntastatur für einfache Zahleneingabe. Durch Drücken auf Num wird die Nummerntastatur ein- und ausgeschaltet. Zusätzlich gibt es Funktionstasten, über die Sie direkt zwischen den Funktionen um- schalten können.
Seite 43
Funktionstasten und visuelle Anzeigen Wenn die Funktionstasten (F1 - F12) gleichzeitig mit der Fn-Taste gedrückt werden, funktionieren sie wie Hotkeys. Neben den Tastenkombinationen für die Grundfunktionen gibt es einige visuelle Anzeigen, wenn der Control Center-Treiber in- stalliert ist. Tasten Funktion/ Visuelle Anzeigen Tasten Funktion/ Visuelle Anzeigen Fn +...
Seite 44
Systemübersicht: Ansicht von vorne, links und rechts (Modell A - Design I) Vorderseite Linke Seite Rechte Seite Abb. 5 - Ansicht von vorne, links und rechts (Modell A - Design I) 1. LED-Anzeigen 8. USB 3.2 Gen 2 Typ-C Anschluss mit Power Delivery (DC- ...
Seite 45
Systemübersicht: Ansicht von vorne, links und rechts (Modell A - Design II) Vorderseite Linke Seite Rechte Seite Abb. 6 - Ansicht von vorne, links und rechts (Modell A - Design II) 1. LED-Anzeigen 8. USB 3.2 Gen 2 Typ-C Anschluss mit Power Delivery (DC- ...
Seite 46
Systemübersicht: Ansicht von vorne, links und rechts (Modell B) Vorderseite Linke Seite Rechte Seite Abb. 7 - Ansicht von vorne, links und rechts (Modell B) 1. LED-Anzeigen 8. USB 3.2 Gen 2 Typ-C Anschluss mit Power Delivery (DC- Eingang)* 2.
Seite 47
Systemübersicht: Ansicht von unten und hinten (Modell A) Design I Design II Abb. 8 Ansicht von unten und hinten (Modell A) Keine Gehäuseteile entfernen oder öffnen 1. Lüftungsöffnung 2. Lautsprecher Entfernen Sie keine Gehäuseteile und/oder Schrauben, um das Gerät aufzurüsten, da anderenfalls Ihre Garantieansprüche verlo- 3.
Seite 48
Systemübersicht: Ansicht von unten und hinten (Modell B) Abb. 9 Ansicht von unten und hinten (Modell B) 1. Lüftungsöffnung 2. Lautsprecher 3. RJ-45 LAN-Buchse 4. HDMI-Ausgangsanschluss 5. DC-Eingangsbuchse 6. DisplayPort 1.4 über USB 3.2 Gen 2 Typ-C Keine Gehäuseteile entfernen oder öffnen Entfernen Sie keine Gehäuseteile und/oder Schrauben, um das Gerät...
Seite 49
Control Center Führen Sie das Control Center über das Startmenü in Windows aus. Sie können auch die Tastenkombination Fn + Esc drükken oder auf das Symbol im Infobereich auf der Taskleiste doppelklicken, um das Control Center zu öffnen. Das Control Center bietet einen schnellen Zugriff auf die Leistungsmodi, die Flexikey® Anwendung, die Lüfter Ein- stellungen und die Konfiguration der LED-Tastatur.
Seite 50
Start-Menü, Kontextmenü, Taskleiste, System- steuerung und Einstellungen von Windows 11 Abb. 10 Start-Menü, Kon- Auf die meisten Apps, Control Panels, Utilities und Programme in Windows 11 können textmenü, Sie über das Start-Menü gelangen. Klicken Sie dazu auf das Symbol in der Taskleis- Taskleiste, Sys- te in der linken unteren Ecke des Bildschirms (oder drücken Sie auf die Windows-Logo- temsteuerung...
Seite 51
Grafikfunktionen NVIDIA Advanced Optimus fähig (Um- schaltbare Anzeige) Dieses System verfügt sowohl über eine integrierte GPU von Intel (zum Energie sparen) und eine diskrete GPU von Ihr Computer verfügt über einen Separaten Grafikmodus NVIDIA (für die Leistung). Wenn die Videotreiber in- Discrete GPU only ), und einen Microsoft Hybrid stalliert sind, können Sie die Anzeigegeräte wechseln und die...
Seite 52
Anzeigegeräte Konfiguration der Anzeige im Einstellfenster Anzeige: 1. Schließen Sie Ihre externe(n) Anzeige(n) an den entsprechenden Beachten Sie, dass Sie externe Anzeigen nutzen können, die Port an und schalten Sie sie anschließend ein. an den HDMI-Ausgangsanschluss und/oder an den Display- 2.
Seite 53
Audiofunktionen Strom & Akku Sie können die Audiooptionen für Ihren Computer über die Über das Bedienfeld Strom & Akku können Sie die Ener- Systemsteuerung Sound in Windows konfigurieren. Greifen gieoptionen für Bildschirm und Energiesparmodus, Ener- Sie auf das Bedienfeld Sound über das Element Ein- giestatus, Stromsparmodus und Akkunutzung usw.
Seite 54
Installation der Treiber Die Disc Device Drivers & Utilities + User's Manual enthält die Treiber und Hilfsprogramme, die für das einwandfreie Funk- tionieren des Computers notwendig sind. Möglicherweise wurden diese bereits vorinstalliert. Ist das nicht der Fall, legen Sie die Disc ein, und klicken Sie auf Install Drivers (Schaltfläche) oder Option Drivers (Schaltfläche), um das Treibermenü Optional aufzurufen.
Seite 55
Wireless-LAN-Modul (Option) Bluetooth-Modul (Option) Stellen Sie vor der Konfiguration sicher, dass das Bluetooth- Stellen Sie vor der Konfiguration sicher, dass das WLAN- Modul eingeschaltet ist (Flugzeugmodus deaktiviert). Modul eingeschaltet ist (Flugzeugmodus deaktiviert). Bluetooth-Konfiguration in Windows WLAN-Konfiguration in Windows 1. Klicken Sie auf den Eintrag Einstellungen im Startmenü. 1.
Seite 56
TPM (Option) TPM Aktionen 1. Klicken Sie auf TPM vorbereiten und folgen Sie den Anwei- Sie können Ihre TPM Einstellungen unter Windows verwalten: sungen des Assistenten, um TPM vorzubereiten (dabei wird mög- licherweise ein Neustart des Computers und eine Bestätigung der 1.
Seite 57
Fehlerbehebung Problem Mögliche Ursache - Lösung Die Module Wireless-LAN/ Im Flugzeugmodus sind die Module ausgeschaltet. Mit der Tastenkombination Fn + F11 Bluetooth können nicht erkannt können Sie den Flugzeugmodus ein- oder ausschalten (siehe Tabelle 4 auf Seite 39). werden. Das Webcam-Modul kann nicht Das ist ausgeschaltet.
Seite 58
Technische Daten Core Logic Speichereinheiten Intel® HM770 Chipsatz Drei M.2 2280 PCIe Gen4 x4 SSDs, die RAID Level 0/1/5 unterstützen BIOS Audio INSYDE BIOS (256Mb SPI Flash-ROM) Aktualität der technischen Daten High-Definition-Audio-kompatible Speicher Die in diesem Teil aufgeführten techni- Schnittstelle Dual Channel DDR5 schen Daten sind zum Zeitpunkt der...
Seite 59
M.2-Steckplätze Umgebungsbedingungen Steckplatz 1 für Kombinierte Bluetooth und Temperatur WLAN-Modul In Betrieb: 5ºC – 35ºC Steckplatz 2 für PCIe Gen4 x4 SSD Bei Aufbewahrung: -20ºC – 60ºC Steckplatz 3 für PCIe Gen4 x4 SSD Relative Luftfeuchtigkeit Steckplatz 4 für PCIe Gen4 x4 SSD In Betrieb: 20 –...
Seite 61
A propos de ce Guide Utilisateur Concis Ce guide rapide est une brève introduction à la mise en route de votre système. Il s’agit d’un supplément, et non pas d’une alternative au Manuel de l’Utilisateur en Anglais complet au format Adobe Acrobat sur le disque Device Drivers & Utilities + User's Manual fourni avec votre ordinateur.
Seite 62
Instructions d’entretien et d’utilisation • Si une odeur inhabituel, de la chaleur ou de la fumée apparaissait sor- tant de votre ordinateur. L’ordinateur est robuste, mais il peut toutefois être endomma- gé. Afin d’éviter ceci, veuillez suivre ces recommandations : Informations de sécurité...
Seite 63
Précautions concernant les batteries polymère/Li- Différences de modèles thium-Ion Cette série d’ordinateurs portables incluent différents mo- Notez les informations suivantes spécifiques aux batteries po- dèles avec des légères variations de style, de couleur et d’ap- lymères/Lithium-Ion, et le cas échéant, celles-ci remplacent les parence.
Seite 64
Guide de démarrage rapide 1. Enlevez tous les memballages. 2. Posez l’ordinateur sur une surface stable. 3. Connectez fermement les périphériques que vous souhaitez utiliser avec votre ordinateur (par ex. clavier et souris) à leurs ports respectifs. 4. Lors de la première installation de l'ordinateur utilisez la procédure suivante (afin de protéger l'ordinateur, la batterie sera verrouillée lors de l'expédition afin de ne pas alimenter le système avant la première connexion à...
Seite 65
Configuration RAID Vos disques SSD peuvent être configurés en mode RAID Niveau RAID Description (pour améliorer les performances ou la protection). Notez Disques identiques lisant et écrivant des don- que la configuration de vos disques SSD en mode RAID RAID 0 nées en parallèle pour améliorer les perfor- doit être faite avant d'installer le SE Windows.
Seite 66
Procédure de configuration RAID 1. Allez à l'ordinateur utilisable et copiez le dossier f6mdflpy-x64 15. Sélectionnez Create Volume (assurez-vous d'avoir sélectionné depuis l'emplacement ci-dessous (D: représente votre lecteur de vos disques). DVD) du disque Device Drivers & Utilities + User’s Manual sur le 16.
Seite 67
Carte du système: Vue de face avec l'écran ouvert ( Modèle A Design I Design II 15,6" (39,62cm) 15,6" (39,62cm) Figure 2 - Vue de face avec l'écran o uvert (Modèle A) 1. Webcam 4. Écran 2. *LED de la webcam 5.
Seite 68
Carte du système: Vue de face avec l'écran ouvert ( Modèle B Figure 3 Vue de face avec l'écran ouvert 1. Webcam 2. *LED de la webcam *Quand la webcam est en cours d'utilisation la LED sera illuminée. 3. Réseau de microphones intégré 4.
Seite 69
Indicateurs LED Les indicateurs LED sur votre ordinateur affichent des informations utiles sur l’état actuel de votre ordinateur. Icône Couleur Description Orange L'adaptateur AC/DC est branché Vert L’ordinateur est allumé Vert clignotant Le système est dans le mode de Veille configuré Orange La batterie est en charge Vert...
Seite 70
Clavier Votre ordinateur est livré avec un clavier à LED multicolore. Vous pouvez changer la couleur pour le clavier à LED multi- colore. Le clavier est doté d'un pavé numérique intégré pour une saisie des données numériques plus facile. Le fait d'appuyer sur Verr Num active ou désactive le pavé...
Seite 71
Touches fonction et indicateurs visuels Les touches de fonctions (F1 - F12 etc.) agiront comme touches de raccourci (hot-key) quand pressée en maintenant la touche Fn appuyée. En plus des combinaisons des touches de fonction de base, des indicateurs visuels sont disponibles quand le pi- lote Control Center est installé.
Seite 72
Carte du système: Vues de face, gauche et droite (Modèle A - Design I) Face Gauche Droit Figure 5 - Vues de face, gauche et droite (Modèle A - Design I) 1. Indicateurs LED 8. Port USB 3.2 Gen 2 Type-C avec Power Delivery (entrée Surchauffe DC)* 2.
Seite 73
Carte du système: Vues de face, gauche et droite (Modèle A - Design II) Face Gauche Droit Figure 6 - Vues de face, gauche et droite (Modèle A - Design II) 1. Indicateurs LED 8. Port USB 3.2 Gen 2 Type-C avec Power Delivery (entrée Surchauffe DC)* 2.
Seite 74
Carte du système: Vues de face, gauche et droite (Modèle B) Face Gauche Droit Figure 7 - Vues de face, gauche et droite (Modèle B) 1. Indicateurs LED 8. Port USB 3.2 Gen 2 Type-C avec Power Delivery (entrée Surchauffe DC)* 2.
Seite 75
Carte du système: Vues de dessous et arrière Modèle A Design I Design II Figure 8 Vues de dessous et arrière (Modèle A) Avertissement de retrait du capot inférieur 1. Ventilation Ne pas retirer le(s) capot(s) et/ou la (les) vis dans le but de mettre 2.
Seite 76
Carte du système: Vues de dessous et arrière Modèle B Figure 9 Vues de dessous et arrière (Modèle B) 1. Ventilation 2. Haut-parleurs 3. Prise réseau RJ-45 4. Prise de sortie HDMI 5. Prise d’entrée DC 6. DisplayPort 1.4 sur USB 3.2 Gen 2 Type-C ...
Seite 77
Control Center Exécutez le Control Center à partir du Menu Démarrer dans Windows . Vous pouvez également appuyer sur la combinaison de touches Fn + Échap ou double-cliquer sur l'icône dans la zone de notification de la barre des tâches pour accéder au Control Center.
Seite 78
Menu Démarrer, Menu contextuel, Barre des tâches, Panneau de configuration et Figure 10 Menu Démarrer, Paramètres de Windows 11 Menu contex- tuel, Barre des La plupart des applications, panneaux de configuration, utilitaires et programmes dans tâches, Panneau Windows 11 sont accessibles depuis le Menu Démarrer en cliquant sur l'icône dans de configuration la barre des tâches dans le coin inférieur gauche de l'écran (ou en appuyant sur la Touche...
Seite 79
Caractéristiques vidéo Compatible NVIDIA Advanced Optimus (Affichage commutable) Le système comporte à la fois un GPU intégré Intel (pour l’économie d’énergie) et un GPU discret NVIDIA (pour les Votre ordinateur dispose d'un Mode Graphique Discret performances). Vous pouvez permuter les dispositifs d'affi- Discrete GPU only ) dédié...
Seite 80
Périphériques d’affichage Pour configurer les affichages en utilisant le panneau de contrôle Affichage: Vous pouvez utiliser des écrans externes connectés à la prise 1. Connectez votre (vos) écran(s) externe(s) au port approprié, puis de sortie HDMI et/ou au DisplayPort sur USB 3.2 Gen 2 allumez-le(s).
Seite 81
Caractéristiques audio Batterie et alimentation Vous pouvez configurer les options audio sur votre ordinateur Le panneau de configuration Batterie et alimentation vous à partir du panneau de configuration Son dans Windows. Ac- permet de régler rapidement les options d'alimentation pour cédez au panneau de configuration Son via l’élément Para- Écran et veille, Mode d'alimentation, Économiseur de mètres (Système >...
Seite 82
Installation du pilote Le disque Device Drivers & Utilities + User’s Manual contient les pilotes et les utilitaires nécessaires pour un bon fonction- nement de votre ordinateur. Cette installation aura probablement déjà été faite pour vous. Si ce n'est pas le cas, insérez le disque et cliquez sur Install Drivers (bouton), ou Option Drivers (bouton) pour accéder au menu des pilotes Optionnels.
Seite 83
Module Bluetooth (Option) Module LAN sans fil (Option) Assurez-vous que le module LAN sans fil est activé (et non Assurez-vous que le module Bluetooth est activé (et non en en Mode Avion) avant que la configuration commence. Mode Avion) avant que la configuration commence. Configuration WLAN dans Windows Configuration Bluetooth dans Windows 1.
Seite 84
TPM (Option) Actions du TPM 1. Cliquez sur Préparer le module de plateforme sécurisée (TPM) Vous pouvez gérer vos paramètres du TPM depuis Windows: et suivez les instructions de l'Assistant pour préparer le TPM (cela nécessitera probablement un redémarrage de l'ordinateur et la 1.
Seite 85
Dépannage Problème Cause possible - résolution modules sans fil/ Les modules sont désactivés quand l'ordinateur est en Mode Avion. Utilisez la combinaison de Bluetooth ne peuvent pas être touches Fn + F11 pour activer ou désactiver le Mode Avion (voir le Tableau 4 à...
Seite 86
Spécifications Core logic Stockage de données Chipset Intel® HM770 Trois SSD M.2 2280 PCIe Gen4 x4 prenant en charge la configuration RAID niveau 0/1/5 BIOS INSYDE BIOS (SPI Flash ROM de 256Mb) Dernières informations de Interface conforme HDA (Son Haute Mémoire spécification Définition)
Seite 87
Logements M.2 Spécifications environnementales Logement 1 pour module combo Bluetooth Température ° ° et LAN sans fil En fonction : 5 C- 35 ° ° Logement 2 pour lecteur SSD PCIe Gen4 Eteint : -20 C - 60 Humidité relative Logement 3 pour lecteur SSD PCIe Gen4 En fonction : 20% - 80% Eteint : 10% - 90%...
Seite 89
Acerca de esta Guía del Usuario Concisa Esta guía rápida es una breve introducción para poner su sistema en funcionamiento. Es un suplemento y no un sustituto del Manual del usuario completo en inglés en formato Adobe Acrobat del disco Device Drivers & Utilities + User's Manual suministrado con el ordenador.
Seite 90
Instrucciones para el cuidado y funcio- • Si hay un olor fuera de lo normal, calor o humo que sale del orde- nador. namiento Información de seguridad El ordenador portátil es muy robusto, pero puede dañarse. Para • Utilice solamente un adaptador de alimentación aprobado para su evitar esto, siga estas sugerencias: uso con este ordenador.
Seite 91
Precauciones a tomar con la batería de iones de li- Diferencias de modelos tio/polímero Esta serie de portátiles incluye diferentes modelos que varían Tenga en cuenta la información siguiente específica para bate- ligeramente en el estilo del diseño, color y apariencia rías de iones de litio/polímero;...
Seite 92
Guía rápida para empezar 1. Quite todos los materiales del embalaje. 2. Coloque el ordenador en una superficie estable. 3. Conecte en los puertos correspondientes los periféricos que desee utilizar con el ordenador (p. ej. teclado y ratón). 4. Al configurar el ordenador por primera vez, siga este proceso (para proteger el ordenador durante el transporte, la batería será...
Seite 93
Configuración RAID Sus unidades solid state (SSDs) pueden configurarse en Nivel de RAID Descripción modo RAID (para rendimiento mejorado o protección). Tenga en cuenta que necesita configurar unidades solid Unidades idénticas leyendo y escribiendo RAID 0 datos en paralelo para aumentar el rendi- state en el modo RAID antes de instalar el SO Windows.
Seite 94
Procedimiento de configuración de 14. Si ha seleccionado RAID 0 (Stripe) podrá ajustar el Strip Size (Tamaño de lista) según sus necesidades (Se recomienda ajustar RAID “Strip Size” (Tamaño de tira) a 128KB). 15. Seleccione Create Volume (asegúrese de haber seleccionado los 1.
Seite 95
Mapa del sistema: Vista frontal con la pantalla abierta (Modelo A) Diseño I Diseño II 15,6" (39,62cm) 15,6" (39,62cm) Figura 2 - Vista frontal con la pantalla abierta (Modelo A) 1. Cámara web 4. Pantalla 2. *LED de cámara web 5.
Seite 96
Mapa del sistema: Vista frontal con la pantalla abierta (Modelo B) Figura 3 Vista frontal con la pantalla abierta 1. Cámara web 2. *LED de cámara web *Cuando la cámara web esté en uso, el LED se iluminará. 3. Micrófono en línea incorporado 4.
Seite 97
Indicadores LED Los indicadores LED en su ordenador muestran una valiosa información sobre el estado actual del ordenador. Icono Color Descripción Naranja El adaptador AC/DC está conectado Verde El ordenador está encendido Verde El ordenador está en modo Suspensión parpadeante Naranja La batería se está...
Seite 98
Teclado Su ordenador viene con un teclado con LED multicolor. Puede cambiar el color del teclado con LED multicolor. El teclado tiene un teclado numérico para una entrada fácil de datos numéricos. Al presionar Bloq Num el teclado numérico se habilita o inhabilita.
Seite 99
Teclas de función e indicadores visuales Las teclas de función (F1 - F12 etc.) actuarán como teclas directas (Hot-Key) cuando se pulsan junto con la tecla Fn. Además de las combinaciones de teclas de función básicas algunos indicadores visuales están disponibles cuando el controlador de Control Center está...
Seite 100
Mapa del sistema: Vistas frontal, izquierda y derecha (Modelo A - Diseño I) Parte frontal Lateral izquierdo Lateral derecho Figura 5 - Vistas frontal, izquierda y derecha (Modelo A - Diseño I) 1. Indicadores LED 8. Puerto USB 3.2 Gen 2 Tipo-C con Power Delivery ...
Seite 101
Mapa del sistema: Vistas frontal, izquierda y derecha (Modelo A - Diseño II) Parte frontal Lateral izquierdo Lateral derecho Figura 6 - Vistas frontal, izquierda y derecha (Modelo A - Diseño II) 1. Indicadores LED 8. Puerto USB 3.2 Gen 2 Tipo-C con Power Delivery ...
Seite 102
Mapa del sistema: Vistas frontal, izquierda y derecha (Modelo B) Parte frontal Lateral izquierdo Lateral derecho Figura 7 - Vistas frontal, izquierda y derecha (Modelo B) 1. Indicadores LED 8. Puerto USB 3.2 Gen 2 Tipo-C con Power Delivery (entrada DC)* 2.
Seite 103
Mapa del sistema: Vistas inferior y posterior (Modelo A) Diseño I Diseño II Figura 8 Vistas inferior y posterior (Modelo A) Advertencia sobre quitar la tapa inferior 1. Rejilla 2. Altavoces No quite ninguna tapa y/o tornillo para actualizar el dispositivo, pues podría violar los 3.
Seite 104
Mapa del sistema: Vistas inferior y posterior (Modelo B) Figura 9 Vistas inferior y posterior (Modelo B) 1. Rejilla 2. Altavoces 3. Conector LAN RJ-45 4. Puerto de salida de HDMI 5. Conector de entrada DC 6. Puerto DisplayPort 1.4 sobre USB 3.2 Gen 2 Tipo-C ...
Seite 105
Control Center Ejecute el Control Center desde el menú Inicio en Windows . También puede presionar la combinación de teclas Fn + Esc o hacer doble clic en el icono en el área de notificación de la barra de tareas para acceder al Control Center.
Seite 106
Menú Inicio, Menú contextual, Barra de tareas, Panel de control y Configuración de Windows Figura 10 Menú Inicio, Menú contex- tual, Barra de Se puede acceder a la mayoría de las apps, paneles de control, utilidades y programas en tareas, Panel de Windows 11 desde el menú...
Seite 107
Parámetros de vídeo Compatible con NVIDIA Advanced Optimus (Pantalla intercambiable) El sistema incluye una GPU integrada de Intel (para el ahorro de energía) y una GPU discreta NVIDIA (para Su ordenador incluye un Modo Discrete Graphics mayor rendimiento). Puede cambiar los dispositivos de Discrete GPU only ) y un Modo gráfico Microsoft pantalla y configurar las opciones de pantalla siempre que...
Seite 108
Dispositivos de pantalla Configurar las pantallas usando el panel de control Pantalla: Tenga en cuenta que puede usar pantallas externas 1. Conecte la(s) pantalla(s) externa(s) al puerto apropiado y conectadas al puerto de salida de HDMI y/o al puerto enciéndala(s). DisplayPort sobre USB 3.2 Gen 2 Tipo-C.
Seite 109
Características de audio Energía y batería Puede configurar las opciones de audio de su ordenador en el El panel de control de Energía y batería le permite ajustar panel de control de Sonido en Windows. Acceda al panel de rápidamente las opciones de energía: Pantalla y suspensión, control de Sonido a través de Configuración (Sistema >...
Seite 110
Instalación de controladores El disco Device Drivers & Utilities + User’s Manual contiene los controladores y utilitarios necesarios para utilizar el ordenador correctamente. Inserte el disco y haga clic en Install Drivers (botón), u Option Drivers (botón) para acceder al menú...
Seite 111
Módulo LAN Wireless (Opción) Módulo Bluetooth (Opción) Asegúrese de que el módulo LAN inalámbrica esté Asegúrese de que el módulo Bluetooth esté encendido (y no encendido (y no en Modo de avión) antes de comenzar la en Modo de avión) antes de comenzar la configuración. configuración.
Seite 112
TPM (Opción) Acciones TPM 1. Haga clic en Preparar TPM y siga las instrucciones del asistente Puede administrar su configuración TPM desde Windows: para preparar el TPM (esto probablemente requiera reiniciar el ordenador y confirmar los cambios de la configuración tras 1.
Seite 113
Solución de problemas Problema Posible causa - Solución Los módulos WLAN y Los módulos están apagados cuando el equipo está en Modo Avión. Utilice la combinación de Bluetooth no pueden teclas Fn + F11 para activar/desactivar el Modo Avión (vea la Tabla 4 en la página 95).
Seite 114
Especificaciones Núcleo logic Audio Chipset Intel® HM770 Interfaz compatible HDA (Sonido de alta definición) BIOS Sound Blaster Studio+ INSYDE BIOS (SPI Flash ROM de 256Mb) Información actualizada de Micrófono en línea incorporado Memoria especificaciones Dos altavoces DDR5 de doble canal Las especificaciones listadas en esta Teclado Dos zócalos de 262 contactos SODIMM...
Seite 115
Ranuras M.2 Especificaciones del ambiente Ranura 1 para módulo combo Bluetooth y Temperatura LAN Inalámbrica En funcionamiento: 5°C - 35°C Ranura 2 para SSD PCIe Gen4 x4 Apagado: -20°C - 60°C Ranura 3 para SSD PCIe Gen4 x4 Humedad relativa Ranura 4 para SSD PCIe Gen4 x4 En funcionamiento: 20% - 80% Comunicaciones...
Seite 117
Informazioni su questa guida rapida Questa guida rapida rappresenta un’introduzione rapida all’avvio del sistema. Si tratta di un supplemento e non di una sostituzione del Manuale per l'utente completo in lingua inglese nel formato Adobe Acrobat, memorizzato sul disco Device Drivers &...
Seite 118
Istruzioni per la custodia e il funziona- • Se c'è un odore non usuale, calore o fumo che fuoriesce dal compu- ter. mento Informazioni di sicurezza Il computer notebook è abbastanza rigido, ma è possibile che possa essere danneggiato. Per evitare qualsiasi danno, attenersi •...
Seite 119
Precauzioni per la batteria polimero/litio-ione Differenze dei modelli Le informazioni seguenti sono molto importanti e si riferisco- Questa serie di notebook comprende diversi modelli che no unicamente alle batterie ai polimeri/agli ioni di litio e, ove variano leggermente per stile di design, colorazioni e aspetto applicabile, hanno priorità...
Seite 120
Guida di avvio rapido 1. Eliminare tutti i materiali di imballo. 2. Appoggiare il computer su una superficie stabile. 3. Collegare bene le periferiche che si desidera usare con il computer (per esempio tastiera e mouse) alle porte corrispondenti. 4. Quando si esegue la prima configurazione del computer utilizzare la seguente procedura (Per proteggere il computer durante il trasporto, la batteria sarà...
Seite 121
Configurazione RAID I SSD (unità a stato solido) possono essere configurati in Livello di RAID Descrizione modalità RAID (per ottenere maggiori prestazioni o più sicurezza). Si noti che la configurazione dei SSD in Unità identiche leggono e scrivono dati in RAID 0 parallelo per aumentare le prestazioni.
Seite 122
Procedimento di configurazione RAID 1. Agendo dal computer separato, copiare la cartella f6mdflpy-x64 15. Selezionare Create Volume (assicurarsi di aver selezionato i dalla posizione seguente (la lettera "D:" rappresenta l'unità DVD) dischi). sul disco Device Drivers & Utilities + User’s Manual all'unità flash 16.
Seite 123
Descrizione del sistema: Vista anteriore con lo schermo aperto (Modello A) Design I Design II 15,6" (39,62cm) 15,6" (39,62cm) Figura 2 - Vista anteriore con lo schermo aperto (Modelo A) 1. Webcam 4. Schermo 2. *LED webcam 5. Pulsante di alimentazione *Quando si utilizza la webcam, il 6.
Seite 124
Descrizione del sistema: Vista anteriore con lo schermo aperto (Modello B) Figura 3 Vista anteriore con lo schermo aperto 1. Webcam 2. *LED webcam *Quando si utilizza la webcam, il LED si illumina. 3. Microfono array integrato 4. Schermo 5. Pulsante di alimentazione 6.
Seite 125
Indicatori LED Gli indicatori LED sul computer segnalano importanti informazioni relative allo stato corrente del computer. Icona Colore Descrizione Arancione L'alimentatore è collegato Verde Il computer è ON Verde lampeggiante Il computer è in modalità Sospensione Arancione La batteria è in carica Verde Batteria completamente carica Arancione lampeggiante...
Seite 126
Tastiera Il notebook viene fornito con una tastiera con LED multicolore. È possibile modificare il colore per la tastiera LED multicolore. Nella tastiera è stato integrato un tastierino numerico per un facile inserimento dei numeri. Premere Bloc Num per commutare l’attivazione e la disattivazione della tastiera numerica. Dispone anche di tasti funzione che consentono di cambiare istantaneamente le funzionalità...
Seite 127
Tasti funzione e indicatori visivi I tasti funzione (da F1 a F12) agiscono come Hot-Key quando premuti tenendo premuto il tasto Fn. In aggiunta alle combinazioni di tasti funzione base, quando è installato il driver Control Center alcuni indicatori visivi sono disponibili. Tasti Tasti funzione e indicatori visivi Tasti...
Seite 128
Descrizione del sistema: Vista anteriore, sinistra e destra (Modello A - Design I) Lato anteriore Lato sinistro Lato destro Figura 5 - Vista anteriore, sinistra e destra (Modello A - Design I) 1. Indicatori LED 8. Porta USB 3.2 Gen 2 Tipo-C con Power Delivery (ingresso Surriscaldamento DC)* 2.
Seite 129
Descrizione del sistema: Vista anteriore, sinistra e destra (Modello A - Design II) Lato anteriore Lato sinistro Lato destro Figura 6 - Vista anteriore, sinistra e destra (Modello A - Design II) 1. Indicatori LED 8. Porta USB 3.2 Gen 2 Tipo-C con Power Delivery (ingresso DC)* Surriscaldamento 2.
Seite 130
Descrizione del sistema: Vista anteriore, sinistra e destra (Modello B) Lato anteriore Lato sinistro Lato destro Figura 7 - Vista anteriore, sinistra e destra (Modello B) 1. Indicatori LED 8. Porta USB 3.2 Gen 2 Tipo-C con Power Delivery (ingresso DC)* 2.
Seite 131
Descrizione del sistema: Vista inferiore e posteriore ( Modello A Design I Design II Figura 8 Vista inferiore e posteriore (Modello A) Avviso di rimozione coperchio inferiore 1. Ventola Non rimuovere il/i coperchio/i e/o vite/viti ai fini 2. Altoparlanti dell'aggiornamento del dispositivo poiché...
Seite 132
Descrizione del sistema: Vista inferiore e posteriore ( Modello B Figura 9 Vista inferiore e posteriore ( Modello B ) 1. Ventola 2. Altoparlanti 3. Jack di rete tipo RJ-45 4. Porta uscita HDMI 5. Jack di ingresso DC 6. Porta DisplayPort 1.4 su USB 3.2 Gen 2 Tipo-C ...
Seite 133
Control Center Esegui il Control Center dal menu Start di Windows . È anche possibile premere la combinazione di tasti Fn + Esc oppure fare doppio clic sull'icona nell'area di notifica della barra delle applicazioni per accedere al Control Center. Il Control Center consente di accedere rapidamente alle Modalità di Alimentazione, alle impostazioni della Ventola, all'applicazione Flexikey®...
Seite 134
Menu Start, Menu contestuale, Barra delle applicazioni, Pannello di controllo e Figura 10 Menu Start, Menu Impostazioni di Windows 11 contestuale, Bar- ra delle applica- La maggioranza delle app, pannelli di controllo, utilità e programmi all’interno di zioni, Pannello di Windows 11 sono accessibili dal menu Start cliccando l’icona nella barra delle controllo e Impo-...
Seite 135
Funzioni video Compatibile con NVIDIA Advanced Optimus (Schermo intercambiabile) Il sistema è dotato sia di una GPU integrata Intel (per il risparmio energetico) sia di una GPU discreta NVIDIA (per Il computer dispone di una modalità dedicata di grafica le prestazioni). È possibile selezionare i dispositivi di discreta (Discrete GPU only), e una modalità...
Seite 136
Dispositivi di visualizzazione Configurare i display utilizzando il pannello di controllo Schermo: Si prega di notare che è possibile usare display esterni 1. Collegare il/i display esterno/i alla porta corretta e quindi connessi alle porte uscita HDMI e/o DisplayPort su USB 3.2 accendere.
Seite 137
Funzionalità audio Alimentazione e batteria È possibile configurare le opzioni audio del computer dal Il pannello di controllo Alimentazione e batteria permette pannello di controllo Audio di Windows. Accedi al pannello di regolare rapidamente le opzioni di alimentazione per di controllo Audio dalle Impostazioni (Sistema > Audio) Schermo e sospensione, Modalità...
Seite 138
Installazione driver Il disco Device Drivers & Utilities + User’s Manual contiene i driver e le utilità necessari per il corretto funzionamento del computer. Inserire il disco e fare clic su Install Drivers (pulsante), oppure il pulsante Option Drivers per accedere al menu del driver opzionale.
Seite 139
Modulo LAN Wireless (Opzione) Modulo Bluetooth (Opzione) Accertarsi che il modulo Wireless LAN sia attivato (e non in Accertarsi che il modulo Bluetooth sia attivato (e non in Modalità aereo) prima di iniziare la configurazione. Modalità aereo) prima di iniziare la configurazione. Configurazione WLAN in Windows Configurazione Bluetooth in Windows 1.
Seite 140
TPM (Opzione) Azioni TPM 1. Cliccare Prepara TPM e seguire le istruzioni della procedura Potete gestire le vostre impostazioni TPM dalll'interno di guidata per preparare il TPM (è probabile che ciò richieda un Windows: riavvio del computer e la conferma delle impostazioni dopo il riavvio mediante la pressione del pertinente tasto).
Seite 141
Risoluzione dei problemi Problema Possibile causa - Soluzione Non è possibile rilevare i moduli I moduli sono disattivati quando il computer si trova nella modalità aereo. Utilizzare la LAN Wireless e Bluetooth. combinazione di tasti Fn + F11 per attivare/disattivare la modalità aereo (vedere la Tabella 4 a pagina 123).
Seite 142
Specifiche tecniche Logica del core Periferiche di memorizzazione Chipset Intel® HM770 Tre SSD M.2 2280 PCIe Gen4 x4 con supporto RAID livelli 0/1/5 BIOS Audio Ultimi aggiornamenti delle INSYDE BIOS (SPI Flash ROM da 256Mb) specifiche tecniche Interfaccia conforme HDA Memoria Le specifiche tecniche elencate in que- Sound Blaster Studio+...
Seite 143
Slot M.2 Requisiti ambientali Slot 1 per il modulo combo Bluetooth e Temperatura ° ° Wireless LAN In esercizio: 5 C - 35 ° ° Slot 2 per SSD PCIe Gen4 x4 Non in esercizio: -20 C - 60 Slot 3 per SSD PCIe Gen4 x4 Umidità...