Hyundai EM 7301 Bedienungsanleitung Seite 38

EN
Coffee grinder (F)
Depending on the frequency of use, clean the coffee grinder regularly (we recommend
at least once a month). Remove coffee bean container F3 and sealing ring F7 for easier
maintenance (Fig. 3). Clean the grinder and its parts in a dry way. Shake out, blow out
or use brush I to remove the coffee powder on the surface of the components. Cover F4
can be washed in water with added detergent (Allow to dry before using it again). Use the
reverse procedure to assemble the coffee grinder after maintenance.
Water tank (D)
We recommend that you clean the tank thoroughly and regularly (about once a week).
Use regular washing-up liquid and then rinse the tank with clean water. So as to prevent
build-up of scale deposits, we recommend that you also rinse the tank under running water
once a day.
Aluminium lever (C)
Remove coffee grounds from the stainless steel bowls (C1, C2) after each use. Rinse
the funnel thoroughly under running water. Wash the filters (C1, C2) in warm water with
detergent and then rinse with clean water. Wipe the plastic handle with a damp cloth. Then
let everything dry.
Drip tray (E)
Pour the drip tray as required. Wash parts E and E1 with a conventional dishwashing
detergent, rinse with clean water and allow to dry.
Steam nozzle and hot water outlet (A3)
The nozzle must be cleaned after each use. You can do so by activating it and immersing
it in a container of clean water and then wiping it with a dry tissue. Also, periodically clean
it by removing it by removing its A5 orifice. Where necessary, use a suitable tool (e.g. needle)
to clean the orifice. Scale deposits in the outlet must be removed (refer to section Descaling).
Hot water outlet (A6)
Scale deposit in the outlet must be removed (refer to section Descaling).
Hot water outlet (A6)
If the drain is contaminated with limescale, it must be removed (see Removing limescale).
For more thorough cleaning you can remove the A7 orifice.
Descaling
We recommend that you remove scale at least once a month. Scale may be removed by
means of a solution of water with preparation destined for these purposes (for example,
ETA518000201). Always follow the manufacturer's instructions for the product, which are
usually on the packaging. The procedure is as follows:
1. Place approx. 1 litre of prepared cleaning solution in tank D (a proportion of detergent
and water - according to the manufacturer's instruction).
2. Position lever C correctly.
3. Place a proper container under the coffee spout, steam nozzle and hot-water spout.
4. After heating up of the coffee machine by pressing B3/B4, make several operation
cycles with the cleaning solution (at least 5-10 cycles are recommended).
5. Then rinse both hot water outlets (A3 and A6) with the cleaning solution, using both hot
water methods (refer to section HOT WATER FUNCTION).
38 / 59