Description Of The Appliance; Preparation For Use - Hyundai EM 7301 Bedienungsanleitung

EN
II. DESCRIPTION OF THE APPLIANCE
A – The machine body
A1 – a djusting knob - steam and hot
water function
A2 – heating surface
A3 – steam nozzle and hot water outlet
A4 – protection cover
A5 – removable mouth
A6 – hot water outlet
A7 – power cord
A8 – power cable department
B – Control panel
B1 – button ON/OFF
B2 – d ish size setting button
(one cup / two cups)
B3 – button for one cup
B4 – button for two cups
B5 – steam and hot water button
B6 – g round coffee quantity selector
switch
B7 – thermometer
C – Aluminium lever
C1 – o verpressure stainless-steel basket
for one cup
C2 – o verpressure stainless-steel basket
for two cups
C3 – c offee tamping lever rest
C4 – folding dish holder
III. PREPARATION FOR USE
Before first use, remove any packaging and protective material (including any protective
film) from the appliance and accessories. Wash the water tank D with warm soap water,
rinse it with clean water and allow it to dry. Put it into the coffee machine again and press
it down as far as it goes.
Location
Place the coffee machine onto a flat and stable surface, near a socket.
Filling the tank with water
Remove the tank D from the coffee machine, open the lid D1 and fill it with water preferably
at room temperature (the water level must be between the MIN and MAX marks). Then put
the tank back in place.
Filling with coffee beans
Remove the lid F4 and fill the container F3 with coffee beans to the brim and then close the
container F3 with the lid F4.
D – Water tank
D1 – hinged lid + handle
E – Drip tray
E1 – drip grille
E2 – control float
F – Coffee grinder
F1 – lever clamp
F2 – O N button of coffee grinder
F3 – coffee bean container
F4 – lid
F5 – coffee grinder lock
F6 – grind size selector switch
F7 – sealing ring
G – Stamper
H – Milk jug
I – Brush
J – Slide-out accessories box
34 / 59