Hyundai WS 8446 Bedienungsanleitung Seite 19

1) Icons weather forecast
2) Outdoor temperature / humidity external sensor
3) Indoor temperature / humidity
4) Time display
5) Calendar
6) Tendency temperature
7) Channel external sensor
8) Alarm Clock icons 1 and 2
9) Symbol Radio Control RCC
10) Snooze/light button
11) ALARM button
12) MEM button
13) SET button
14) UP button
15) DOWN button
16) Battery Compartment 3 x AAA (batteries not included)
17) External power supply socket
18) Pedestal
19) TX button
20) TX channel selector, select external sensor channel
21) Compartment 2xAA batteries (batteries not included)
POWER METEO STATION
Open the battery compartment (16) on the back of the unit and insert three "AAA" cell batteries
according to polarity. Insert the external power in the socket (17), insert the adapter into a wall
outlet.
POWER SENSOR EXTERNAL
Open the battery compartment (21) on the rear, and insert two "AA" size batteries matching
the polarities.
SETTING THE EXTERNAL SENSOR
This weather station is arranged to communicate with three external sensors.
One of these comes with the unit, the remaining two are optional.
1) Power the weather station as described in POWER METEO STATION.
2) Insert the batteries in the external sensor, set the selector (20) to the desired transmission
channel (1, 2 or 3). Automatic weather station data to be transmitted.
3) Press the UP button (14) more times to select the channel set on the external sensor.
Sequentially selects the channel 1, channel 2, channel 3 or sequential display of 3 channels
(icon flashing channel). In case of non receipt of the display signal it is shown the character
"-" .
Notes:
Place the weather station away from equipment that generates magnetic fields such as mobile
phones, televisions etc ....
EN - 17
EN