Braun CareStyle 7 Bedienungsanleitung Seite 15

This setting can also be used to refresh and
hygienize garments that were in the closet
before dressing.
Note: Do not use the hygienize function on
people and pets.
Boost function
(CareStyle 7 Pro only)
With this setting you can iron with maximum
steam during 15 minutes.
To activate press the boost button (2).
z
The boost icon and the turbo icon
z
turn permanently on and you hear a short
beep.
To stop this function, press the iMode
z
selector (5a) or the boost button again.
After 15 minutes you can continue ironing in
the turbo mode.
Note: The boost function is only available
if the temperature has been reached and
steam is ready.
ProSteam
(CareStyle 7 Pro only)
This setting provides up to 30 seconds of
continuous steam, without pressing the
steam button (6).
As it has a similar steam rate to the iCare
setting it is suggested for the same
garments like wool, polyester and cotton.
To activate this setting, select ProSteam
z
and press once the steam button (6).
The iron will steam automatically for 30
z
seconds.
To stop the function earlier, press the
z
steam button again.
Vertical steam
The iron can also be used for steaming
hanging clothes. Hold the iron in a vertical
position and select ProSteam
Caution: steam is very hot. Never iron or
dampen garment while wearing them.
Ergonomic certification
This unit, assessed and certified by an
Ergonomics Certifying Institute has been
ergonomically designed,
ironing and excellent results fulfilling the
ergonomic
Polytechnical, Biomedical, Psychosocial
(usability) and Human Centered Design
Process area.
Real users have been actively involved in
all phases of product design and in testing
process to get a more satisfying experience.
Follow the below recommendations, for an
effortless and more comfortable ironing
experience:
z
z
z
(E) Auto Off
This function is activated if after 10 minutes
there has been no steam emission.
z
z
setting.
z
(F) Descaling
Never open or touch the closure (10) when
the appliance is hot and/or plugged in.
for effortless
Do not use any chemicals, additives or
descaler to rinse the boiler.
requirements
Before starting your ironing session, it
is recommendable to self-adjust your
ironing board in order to reduce shoulders
bad postures. The ideal position should
allow a 90° angle for your elbow so that
your shoulders and back can freely move.
In addition, for extra comfort and
convenience during
transportation, wrap the power cord
around your hand before storing it inside
the machine securely, then block it with
the provided clip.
It is recommendable emptying the water
tank before transporting the unit and
making sure not to overly bend your back
while lifting it.
When the iron is in the auto-off mode, the
On/Off button (1) and the icon related to
the selected setting start flashing.
To continue ironing, press any button and
wait until the related icon for the setting is
permanently on.
After additional 10 minutes without steam
emission, the iron and the steam station
turn off.
belonging to
storage and
15