Herunterladen Inhalt Inhalt Diese Seite drucken

Use; Operation; Child Safety Lock - clage Zip HydroTap G5 B 60 Gebrauchs- Und Montageanleitung

Vorschau ausblenden Andere Handbücher für Zip HydroTap G5 B 60:
Inhaltsverzeichnis

Werbung

5. Use

Hot water lever
White filter LED
SELECT
SAFETY
Zip lever
Safety button

Operation

Classic
Press the red lever to dispense hot water (max. 15 sec.). Pull the lever up to dispense
hot water continually. The water will flow for 5 to 15 seconds. This time can be set in
the menu. The lever then has to be manually returned to the Off position.
Classic Plus
Press the red button to dispense hot water. When the button is pressed, hot water
flows as long as it is pressed (max. 15 sec.).
Quantity filling: Before selecting the water type, press the fill button. After pressing the
red button briefly, water flows for a period of between 5 and 15 seconds that can be
set in the menu.
Touch-Free
Hold your hand approx. 1.5 – 5 cm in front of the left and rear sensors to dispense hot
water. Hot water flows as long as the hand is held in the sensor area (max. 15 sec.).
Note: To ensure smooth functioning of the sensor tap, make sure there is a free
space of min. 10 cm around the sensor head.
Arc
Select the desired type of water by tipping to on the Select button on the ZIP lever at
the tap.
• Red: boiling water
Turn the lever to dispense water. When the lever is turned counterclockwise, water will
flow as long as the lever is held (max. 15 sec.). If the lever is turned clockwise, water
will flow continually for 5 to 15 seconds. This time can be set in the menu. The lever
then has to be manually returned to the Off position.
Red light (Arc / Classic Plus / Classic)
• On all the time: boiling water is ready and can be dispensed.
• Flashing: the water has not yet been heated to the set temperature.
White filter LED (Classic)
• Flashing: the filter needs to be replaced. This LED starts flashing according to filter
use and the filter capacity set in the menu.
Note: For the tap Arc the need for a filter replacement is indicated by cyclically
flashing all the LEDs in all three colours

Child safety lock

A child safety lock can be enabled to prevent boiling water flowing out of the tap if the
red button is accidentally operated.
The child safety lock can be enabled and disabled under "Safety & Security" in the
menu.
Classic / Classic Plus
To dispense boiling water when the child safety lock is enabled, press the Safety button
and the red lever at the same time.
25
CLAGE
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis