Disposal - VOSS.farming ChickenFriend Bedienungsanleitung

Error
Door does not
open and close
depending on the
light sensor
Door does not
open/close
14

DISPOSAL

The crossed-out wheelie bin symbol on the product or its packaging
indicates that the product must not be disposed of with normal
household waste. End users are required to hand in the appliance at a
collection point for waste electrical and electronic equipment.
If the product contains a battery or a rechargeable battery, these
should be disposed of separately from the product if possible. As an end user
you are legally obliged to return used batteries. You can return used batteries
that we supply or have supplied as new batteries free of charge to our warehouse
(shipping address) or to a recycling centre in your area. If the battery or the
rechargeable battery contains more than 0.0005% mercury by weight, more
than 0.002% cadmium by weight or more than 0.004% lead by weight, this will
be clearly indicated by the respective chemical symbol (Hg Cd, or Pb) below the
symbol of the crossed-out wheelie bin on the battery or the rechargeable battery.
Recyclable materials such as zinc, iron, aluminium, lithium and silver can be
found in batteries and rechargeable batteries. They may also contain substances
such as mercury, cadmium and lead. These are poisonous and dangerous to the
environment if not disposed of properly. Heavy metals can have harmful effects
on human, animal and plant health and accumulate in the environment.
The separate collection and proper disposal of your old appliances and used
batteries/rechargeable batteries contributes to the conservation of natural
34
INSTRUCTION MANUAL VOSS.FARMING CHICKENFRIEND
Cause
∙
Light sensor mode not
active
∙
Light sensor
incorrectly mounted
∙
Light sensor defective/
dirty
∙
Brightness value set
incorrectly
∙
External light
interfering with the
light sensor
Door stuck
∙
Too little weight on the
cord, either because
the door is too light
or the door jams and
therefore does not move
downwards
Troubleshooting
∙
Select the lightsensor
mode
∙
Reposition the light
sensor if necessary
∙
Clean the light sensor
regularly
∙
Re-adjust the brightness
value
∙
Check the ease of
movement of the door
∙
Check the ease of
movement of the pull
cord / pulleys
561820 - 01.2022 - V3