Reset To Factory Settings (To Factory Default); Cleaning And Maintenance; Transport And Storage - VOSS.farming ChickenFriend Bedienungsanleitung

3. Use the setting buttons (3) to move the door to the lowest position and confirm
by pressing the confirmation button (4).
The settings are saved.

10.4 RESET TO FACTORY SETTINGS (TO FACTORY DEFAULT)

Reset Device
RESET DEVICE
YES
1. In the main menu, open the menu item "Reset device".
2. To cancel the reset and return to the main menu, press the downward setting
button (3).
3. To reset the unit to factory settings, press the upward setting button (3).
4. To cancel the reset and return to the main menu, press the downward setting
button (3).
5. To confirm the reset and start with the initial set-up, press the upward setting
button (3).
I nfo
The device can also be reset by pressing (for approx. 15 seconds) the
confirmation button.
11

CLEANING AND MAINTENANCE

NOTI CE
»
Do not use aggressive solvents/cleaning agents, brushes, sharp
objects or similar for cleaning. These can damage the surface.
»
Do not submerge the device in water or other liquids. There is a
risk of a short circuit.
»
Do not use the device if there is any visible damage.
Clean the device and the light sensor with a damp cloth if it is dirty.
The device requires little maintenance. However, you should carry out regular
visual inspections. Check the unit for damage before each use. There are no
serviceable parts inside the unit.
12

TRANSPORT AND STORAGE

NOTIC E
»
For storage and long distance transport, remove the batteries
from the device.
»
Do not store the device in direct sunlight.
32
INSTRUCTION MANUAL VOSS.FARMING CHICKENFRIEND
ARE YOU SURE?
NO YES
First Start
NO
Main Menu
561820 - 01.2022 - V3