Installation; First Time Operation; Connecting The Mains Adapter - VOSS.farming ChickenFriend Bedienungsanleitung

the door is released it closes independently and reliably. Use a few drops
of oil if necessary. The pull cord can be routed unhindered from the door
to the unit without rubbing against foreign objects.
• The guide rails of the door must be properly mounted so that the door
closes securely.
Info
You will find suitable doors in our range (Art. 561860, 561862 and 561863).
7.2

INSTALLATION

Before assembly, read the points in section 7.1.
1. Mount the compatible door on the coop.
NOTI CE
The distance between the door and the opening, e.g. your open
barn wall, should not be more than 5mm. In addition, there should
be no gap when the door is closed.
2. Mount the VOSS.farming ChickenFriend in a suitable position using the dowels
and screws supplied.
3. Fit the pulleys, if required.
NOTI CE
To avoid friction on the device and pulleys, all parts of the chicken
door should be on an even surface. Therefore, avoid mounting on
uneven surfaces.
8

FIRST TIME OPERATION

The VOSS.farming ChickenFriend can be operated both with the supplied mains
adapter via 230 V mains voltage and with 1.5 V AA mignon cells (4 pcs.).
Info
In the event of a mains failure, both power supplies can be used
simultaneously.
As soon as the VOSS.farmig ChickenFriend is connected via mains adapter and/
or batteries are inserted in the unit, you can start the initial setup and connect
the unit to the door.
8.1

CONNECTING THE MAINS ADAPTER

1. Plug the supplied mains adapter into the connection (7) on the unit.
2. Plug the mains adapter into a correctly installed 230 V socket.
WARNING OF ELECTRICAL VOLTAGES
If a new cable has to be laid for the unit, please note that all mains
installations can only be carried out by qualified electricians.
26
INSTRUCTION MANUAL VOSS.FARMING CHICKENFRIEND
561820 - 01.2022 - V3