Scott Safety PROFLOW 2 SC 160 Bedienungsanleitung Seite 19

BLOWER UNIT PROFLOW 2 SC 160 ASBESTOS
MARKINGS, SYMBOLS, APPROVALS
75
EN 12941:1998+A2:2008
EN 12942:1998+A2:2008
TM3 (EU) PAPR P2 (ANZ)
These products meet the requirements of European Regulation (EU) 2016/425 and applicable local
legislation. The applicable European/local legislation and Notified Body can be determined by reviewing the
Certificate(s) and Declaration(s) of Conformity at www.3m.com/Respiratory/certs. The blower unit Proflow
has been designed to conform with EN 12941:1998+A2:2008, EN 12942:1998+A2:2008.
GENERAL
Proflow is a respirator system designed to supply filtered air for use in dangerous environments.
The device consists of a waist-mounted battery-driven blower and two filters.
Air is drawn through the filters by an electronically-controlled fan and led through the breathing hose into
the facepiece.
Model SC: The operation data can be read at a service center by a computer program.
You must fully read these instructions before using this equipment
Storage information
Humidity, temperature, end of shelf life
Respiratory protective devices. Powered filtering devices incorporating a helmet
or a hood.
Respiratory protective devices. Power assisted filtering devices incorporating full
face masks, half masks or quarter masks.
Classification and protection factor
CE: European conformity – These products are type approved and annually audited by
either BSI Group, The Netherlands B.V. Say Building, John M. Keynesplein 9, 1066 EP
Amsterdam, The Netherlands, Notified Body No. 2797 and / or BSI Assurance UK Ltd,
Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, UK, Notified Body
No. 0086.
Disposal (WEEE)
11 Proflow 2 SC 160 Asbestos Issue G
GB