UBSAN ZINO MINI PRO Benutzerhandbuch Seite 22

One-key RTH
App one-key RTH / remote control one-key RTH
Low battery RTH
1. The aircraft will automatically Return to home according to its own power calculations
and the distance from the Home Point.
2. Aircraft will land automatically at the same point upon low battery RTH activation if
there is no GPS signal or weak GPS signals.
3. When taking off, if it is forced take off with weak GPS signals or GPS signals are not
good, the aircraft will automatically return to the place where it achieved, good GPS
signal for the first time.
4. If the power is less than 10% or the battery voltage is less than 10.6 V, aircraft will
enter in forces landing mode.
Failsafe RTH
When the aircraft loses connection with the remote control for more than 5 seconds, the
aircraft automatically returns or lands directly. Performance requirements:
1. After the aircraft loses control for 5 seconds, it triggers automatic return.
2. If the drone reconnects, it will continue to perform the returning procedure when
Failsafe RTH mode is activated.
3. Landing directly when there is no GPS signal, or the signal is not strong.
4. Landing Apron Search
When the aircraft is landing or returned to a height of about 10 meters from the ground,
it will automatically enter the search for the drone apron function.