Charging The Transmitter Battery - UBSAN ZINO MINI PRO Benutzerhandbuch

11
Charging /Adapter Port
12
Low Battery Warning
13 Standby Protection

3. Charging the Transmitter Battery

The remote is charged using the Micro USB cable as shown:
The remote-control charging time is about 2.5 hours. The remote-control battery
indicator light flashes during charging. When charging is complete, the LED's will stay on
solid. The use time after fully charged is about 1.5 hours.
home is activated. Press the Fn button for
1.5 seconds, to stop beeping prompts.
Custom keys, set the function on the APP
and save it when the APP is not
connected, (short press) Fn will not work.
Function one: Exit the current flight
mode.
In this mode, short press Fn to exit the
current flight mode and the aircraft will
hover.
Function two: short press Fn to execute
gimbal return to normal state.
Function three: no function (factory
default function).
Charge the remote control or connect
with a mobile device.
Low battery warning for the aircraft or
remote control: Remote control "Beeps"
once every second.
If Remote controller is left on and unused,
t will start beeping once every 3 seconds
and switch to stand by mode. After 3
minutes of beeping, remote control will
automatically shut down.