UBSAN Zino MINI SE Bedienungsanleitung Seite 40

Gimbal Pitch Adjustment
Please make sure there are no stickers or impurities on the gimbal before take-
•
off, and place the aircraft on flat and open ground. Please do not bump the
gimbal after the power is turned on.
The gimbal contains precision parts. If it is hit or damaged, the precision parts will
•
be damaged, which may cause the performance of the gimbal to decrease.
Please take good care of the gimbal and camera from physical damage.
Please keep the gimbal clean and avoid the gimbal from contacting foreign
•
objects such as sand or stone, otherwise it may block the movement of the
gimbal and affect its performance.
If the aircraft is placed on uneven ground or grass, the ground object touches the
•
gimbal, or the gimbal is subjected to excessive external force (such as being
bumped or broken) may cause the gimbal motor to be abnormal.
Do not add any objects to the camera head, otherwise it will affect the
•
performance of the head and even burn the motor.
Remove the gimbal protection latch before use and then turn it on. Reinstall the
•
gimbal latch to protect the gimbal during storage or transportation.
Flying in heavy fog or clouds can cause the gimbal to condense, resulting in
•
temporary failure. If this happens, the gimbal can return to normal after drying.
40