UBSAN Zino MINI SE Bedienungsanleitung Seite 35

Waypoint Planning: You can pre-set the waypoint parameters such as the number of
waypoints, the altitude of each waypoint and other parameters. The aircraft will follow
the pre-set parameters after you activate waypoint mode. You can control the flying
speed during flight, or you can pause or resume the Waypoint mode.
Waypoint Memory: After entering the mode, fly the aircraft and tap on "Memorize
Waypoints" on the APP and the aircraft will mark the location. After memorizing all the
waypoints, upload and execute, aircraft will fly according to recorded waypoints. If the
aircraft is not in the starting position, the aircraft will fly to the starting waypoint position
before starting this function.
Line Fly Mode
Tap on "Mode Selection" then "Line Fly Mode".Set the angle,distance and speedof the
aircraft.
Performance requirements:
1. Set the angle (0 ~ 360 °, accuracy 1 °); Set the distance (10-6000 meters, accuracy 1
meter); Set the speed (1-8 m / s, accuracy 0.1);
2. Once setup is complete, the aircraft will execute Line Fly mode. During the flight, pilots
can take photos or videos manually, or pause / resume / stop the flight at any time.
During the flight, you can control the altitude only.
3. You can pause/resume/stop the flight at any time.
4. When the aircraft is low on battery or lost connection from radio, aircraft will always
return to home.
35