UBSAN Zino MINI SE Bedienungsanleitung Seite 18

5 F / N / S mode (Movie /
Normal / Sport mode)
6 Display
7 Photo
8 Video
9 Gimbal Pitch control
dial
10 Custom Keys
11 Charging / Adapter
Port
12 Low Battery Warning
13 Standby Protection
Movie mode: Flying speed of the drone is limited to
3m/s Normal mode: The maximum speed of the flying
machine set by APP Flight, maximum 10m/s Sport
mode: the maximum flight speed of the aircraft 16m/s
Displays the flight parameters
Short press to take photos.
Long press to start recording video, short press to
stop recording video
Controls the pitch angle of the gimbal.
Long press the Fn+ wheel to adjust the zoom function.
Press and hold the Photo+ wheel to adjust the
brightness of the remote-control screen. The remote-
control buzzer beeps when a low battery is triggered
or return to home is activated. Press the Fn button for
1.5 seconds, to stop beeping prompts. Long press the
Fn button again 1.5 seconds to restart the beeping
prompts. Custom keys, set the function on the APP
and save it when the APP is not connected, [short
press] Fn won't work. Function one: Exit the current
flight mode. In this mode, short press Fn to exit the
current flight mode and the aircraft will hover.
Function two: short press Fn to execute gimbal return
to normal state. Function three: no function (factory
default function)
Charge the remote control or connect with a mobile
device
Low battery warning for the aircraft or remote control:
Remote control "Beeps" once every second.
If Remote controller is left on and unused, it will start
beeping once every 3 seconds and switch to standby
mode. After 3 minutes of beeping, remote control will
automatically shut down
18