Fein RS17-70E Serie Originalbetriebsanleitung Seite 15

Translation of the Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
~ (a. c.)
(**)
***
(Ax – Zx)
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Do not touch the rotating parts of the power tool.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Additional information.
Gripping surface
Confirms the conformity of the power tool with the directives of the European
Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
Applies only for China:
The duration of environmental protection under normal use of the product is 10 years.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Switching on
Switching off
Locked
Not locked
Alternating current
Low sanding-belt speed
High sanding-belt speed
See section "Operating Instructions"
Grease sliding surfaces as required
May contain numbers and letters
Partially in delivery scope
Marking for internal purposes
en
15