Klarstein CRISP-PRO Bedienungsanleitung Seite 27

Operation
1. Insert the basket and plug unit in.
2. Long press the ON/OFF key, an audible tone comes, screen temp showing
180 ℃ and flashes The time shows 15 min.
3. Using a preset menu setting: Touch the 'MENU' key , switch to mode pre-
setting. The selected menu appears in the display. Touch the 'MENU' key, the
icons will show on one by one. One icon appears with its pre-setting time and
temperature. Once you have selected a certain icon, touch the START/PAUSE
key. The machine will start to cook. The display shows the set temperature (7)
and the set time (8), the motor working status (5). The heating working status
(4) light is on.
4. Setting the temperature: The temperature display flashes. Turn the knob
(2) for desired cooking temp setting. 5 ℃. will be added or decreased. Set a
temperature within the range of 80-200 ℃.
5. Setting the time: Short press the Power ON/OFF key, then the Temp &Time
"+-"key Knob. The time display flashes. Turn the knob (2) for desired cooking
time setting. One minute is added or decreased. Set a time within the range
of 0-60 min.
6. Start cooking: Touch START/PAUSE key(3).
7. Switching off / pausing the machine:
• Touch the Start/Pause key (2). The heating element and motor stop
working. The motor working status and the heating working status light
switch off.
• Take out the basket. The icon is off. The heating element and motor stop
working. Relocating the basket, can resume previous working status.
• At the end of cooking time, an audible tone sounds 6 times. The
temperature setting stays the same and the timer shows '00'. After 20
seconds, the screen will switch off automaticly.
8. Long press the Power ON/OFF key to turn the unit.
EN
27