Niceboy HIVE DROPS 3 Bedienungsanleitung Seite 15

4. Open the Bluetooth settings on your device and find the
"Niceboy HIVE Drops 3" option from the list of available devices.
5. Successful pairing is announced by an acoustic signal and the
LED diode (1) will flash blue at longer intervals.
Removing the earphones from their charging box is all it takes to
connect the earphones again at a later time. The earphones will
automatically power on and connect to your device.
POWERING ON AND OFF
Just take the earphones out of their charging box to power them on,
or manually power on the earphones by pressing and holding both
multifunctional buttons. Then, place the earphones back in their
charging box to power them off. They will power off and disconnect
from your device on their own. You will know the earphones have
been placed back in their box correctly when the LED diode (1)
shines red. The diode will stop shining once the earphones have
reached a 100% charge. You may also power off the earphones by
pressing and holding both multifunctional buttons (2) for about 5
seconds.
MULTIFUNCTIONAL BUTTON - BASIC CONTROLS
Pressing any button twice - play/pause
Pressing the right button once - increase volume by one, accept an
incoming call/hang up a call
Pressing the left button once - decrease volume by one, accept an
incoming call/hang up a call
Pressing and holding the right button - next track, decline an
incoming call
15