Network Setup; Wi-Fi Connection Via Wps - Gold Note IS-1000/Deluxe/Line Bedienungsanleitung

NETWORK SETUP

WLAN CONNECTION
IS-1000 supports both Wired LAN and Wi-Fi connection.
To use a Wired LAN connection simply plug the cable into the Ethernet port on the rear panel and you are ready to go.

WI-FI CONNECTION VIA WPS

The easiest way to connect IS-1000 to your network via Wi-Fi is to use the WPS [Wi-Fi Protected Setup] function available on
IS-1000 and you router:
1 - use the tip of a paper clip to press and hold for about 10 seconds the Wi-Fi Reset button on the rear panel of IS-1000
and release it when the blue led start flashing
2 - press the WPS button on your router (please refer to the instruction manual)
3 - wait until IS-1000 automatically connect to your network
4 - the blue led will turn ON when the IS-1000 is connected and ready
15
LED
LED