Patton Kamado 21 Gebrauchsanweisung Seite 37

STEP 8 - When the grill is securely placed on the cart add the firebox (8), charcoal plate (7), and upper ring (6)
inside of the Kamado Grill as displayed in the assembly diagram.
STEP 9 - Press down on the castor levers (2) to lock the castor wheels to ensure the Kamado can not move when in
use.
STEP 10 - To attach the handle (10) to the lid of the kamado Grill (9) start by attaching 2x handle brackets (11) using the
2 pre-attached bolts and dome headed nuts. Attach the handle (11) to the brackets (10) using 2 bolts (C) and
nuts (H).
STEP 11 - To attach the top vent (12) to the kamado grill (9) place it on top and align both the bolt holes. Secure using 2
bolts (C) and nuts (H). Ensure that the vent top bolt is on the left hand when assembling it.
STEP 12 - Attach the 2 table brackets (15) to the kamado grill (9) using the 4 pre-attached bolts and dome headed nuts
per bracket. Please note the position shown in the above diagram.
STEP 13 - Attach the 2 table brackets (16) to the kamado grill (9) using the 4 pre-attached bolts and dome headed nuts
per bracket. Please note the position shown in the above diagram.
STEP 14 - Insert the 2x table hinge into each of the table brackets (15 & 16)
STEP 15 - Install LED lamp on the handle bracket.
STEP 16 - Place the Bluetooth thermometer in the recess on he table. The Bluetooth stents in attraction at the bottom
of the table. See below standing drawing.
The Kamado Grill is now ready to use but please ensure you have read these instructions thoroughly prior to
use.
Assembly diagram
2
GB, IE
37
1
B