Patton Kamado 21 Gebrauchsanweisung Seite 13

Assembly instructions
9
STEP 10 - To attach the handle (10) to the lid of the Kamado Grill (9) start by attaching 2x handle brackets (11)
using the 2x pre-attached bolts and dome headed nuts. Attach the handle (11) to the brackets (10) using
2x bolts (C) and nuts ( ).
Zorg ervoor dat de ontluchtingsbout bovenaan zich bij de montage aan de linkerhand bevindt.
STEP 10 - To attach the handle (10) to the lid of the Kamado Grill (9) start by attaching 2x handle brackets (11)
using the 2x pre-attached bolts and dome headed nuts. Attach the handle (11) to the brackets (10) using
2x bolts (C) and nuts ( ).
12
E
1
Assembly instructions
E
STEP 11 - To attach the top vent (12) to the Kamado Grill (9) place it on top and align both the bolt holes. Secure
using 2x bolts (D) and nuts (E) . Ensure that the top vent bolt is on the left hand side when assembling it.
１５
8
STEP 11 - To attach the top vent (12) to the Kamado Grill (9) place it on top and align both the bolt holes. Secure
�
using 2x bolts (D) and nuts (E) . Ensure that the top vent bolt is on the left hand side when assembling it.
STEP 12 –
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
headed nuts per bracket. Please note the position shown in the above diagram
8
Ensure that the top vent bolt is on the left hand side when assembling it.
Ensure that the top vent bolt is on the left hand side when assembling it.
NL, BE, LU
13
1
1
G
C
10
H
11
G
C
D
D
9
１６
１５
9
１６