headed nuts per bracket. Please note the position shown in the above diagram
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
STEP 13 –
headed nuts per bracket. Please note the position shown in the above diagram.
�ttach the �� table brackets ���� to the �amado �rill ��� using the �� pre�attached bolts and dome
STEP 13 –
headed nuts per bracket. Please note the position shown in the above diagram.
15
15
13 & 14
13 & 14
STEP 14 - �nsert the �� table hinge into each o� the table brackets ��� � ���.
STEP 14 - �nsert the �� table hinge into each o� the table brackets ��� � ���.
STEP 15 -
�nstall ��� lamp on handle bracket.
STEP 15 -
�nstall ��� lamp on handle bracket.
FR, CH
28
16
16
�
�
9
9