Siemens RMU730B-1 Bedienungsanleitung Seite 39

Enter additional switching points
1. Select the desired day.
2. In the diagram, advance pointer
in time of the current program.
3. Turn the OK knob by one notch; ––:––
appears.
4. Set the desired start time.
5. Set the desired room operating mode.
Copy a 24-hour heating / cooling program
1. Select the day to be copied.
2. Turn the OK knob clockwise until Copy to: appears.
3. Press the OK knob.
4. The menu for the day selection (week sections,
individual weekdays, special day) appears.
5. Select the desired weekday or week section.
6. Copy (press the OK knob).
First, write down a 7-day schedule for daily switching times and operating modes – this will facilitate entry into the
Building Technologies / HVAC Products
to the last point
––––––
controller!
CE1B3144x2
Create a new 24-hour program
The controller is supplied with a 24-hour program for
every day (including special days). This means that you
will never have to create a new 24-hour program, but
only change an existing program.
Operating voltage off – heating / cooling program
lost?
In the event of a power failure, the 24-hour programs
entered will be maintained, independent of the duration
of the power failure.
74 319 0350 0a
15
31.01.2007