Do Not Heat Or Cool Per Time Switch Program - Siemens RMU730B-1 Bedienungsanleitung

Do not heat or cool per time switch program

Select another room operating mode
If you do not want to heat or cool according to the time
switch program (i.e., not automatically), you need to
change the preselection for the room operating mode.
Room operating
Symbol
mode
Comfort
Precomfort
Economy
Protection
Do not forget to switch back to auto when you only intend to heat/cool temporarily!
10
Building Technologies / HVAC Products
Comments
Plant ON, Heating / Cooling on comfort
Plant ON, Heating / Cooling on precomfort
Plant OFF, Sustained mode Heating / Cooling on economy;
Night cooling and frost protection activated
Plant OFF, frost protection active
Path: Welcome > Main menu > Room operating mode... > Preselection > ...
CE1B3144x2
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Setting setpoints is described on
74 319 0350 0a
pages 12 and 13.
31.01.2007